source: GTP/trunk/App/Demos/Geom/OgreStuff/include/CEGUI/CEGUIImage.h @ 1092

/************************************************************************
        filename:       CEGUIImage.h
        created:        13/3/2004
        author:         Paul D Turner
        
        purpose:        Defines interface for Image class
*************************************************************************/
/*************************************************************************
    Crazy Eddie's GUI System (http://www.cegui.org.uk)
    Copyright (C)2004 - 2005 Paul D Turner (paul@cegui.org.uk)

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
    version 2.1 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Lesser General Public License for more details.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*************************************************************************/
#ifndef _CEGUIImage_h_
#define _CEGUIImage_h_

#include "CEGUIBase.h"
#include "CEGUIString.h"
#include "CEGUIRect.h"
#include "CEGUIColourRect.h"
#include "CEGUIVector.h"
#include "CEGUISize.h"
#include "CEGUIRenderer.h"
#include <map>


#if defined(_MSC_VER)
#       pragma warning(push)
#       pragma warning(disable : 4251)
#endif


// Start of CEGUI namespace section
namespace CEGUI
{
/*!
\brief
        Class that represents a single Image of an Imageset.
*/
class CEGUIEXPORT Image
{
public:
        /*!
        \brief
                Return a Size object containing the dimensions of the Image.

        \return
                Size object holding the width and height of the Image.
        */
        Size    getSize(void) const                     {return Size(d_scaledWidth, d_scaledHeight);}
        

        /*!
        \brief
                Return the pixel width of the image.

        \return
                Width of this Image in pixels.
        */
        float   getWidth(void) const            {return d_scaledWidth;}


        /*!
        \brief
                Return the pixel height of the image.

        \return
                Height of this Image in pixels
        */
        float   getHeight(void) const           {return d_scaledHeight;}


        /*!
        \brief
                Return a Point object that contains the offset applied when rendering this Image

        \return
                Point object containing the offsets applied when rendering this Image
        */
        Point   getOffsets(void) const          {return d_scaledOffset;}


        /*!
        \brief
                Return the X rendering offset

        \return
                X rendering offset.  This is the number of pixels that the image is offset by when rendering at any given location.
        */
        float   getOffsetX(void) const          {return d_scaledOffset.d_x;}


        /*!
        \brief
                Return the Y rendering offset

        \return
                Y rendering offset.  This is the number of pixels that the image is offset by when rendering at any given location.
        */
        float   getOffsetY(void) const          {return d_scaledOffset.d_y;}


        /*!
        \brief
                Return the name of this Image object.

        \return
                String object containing the name of this Image
        */
        const String&   getName(void) const;


        /*!
        \brief
                Return the name of the Imageset that contains this Image

        \return
                String object containing the name of the Imageset which this Image is a part of.
        */
        const String&   getImagesetName(void) const;

    /*!
    \brief
        Return Rect describing the source texture area used by this Image.

    \return
        Rect object that describes, in pixels, the area upon the source texture
        which is used when rendering this Image.
    */
    const Rect& getSourceTextureArea(void) const;

        /*!
        \brief
                Queue the image to be drawn. 
                
        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param position
                Vector3 object containing the location where the Image is to be drawn

        \param size
                Size object describing the size that the Image is to be drawn at.

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param top_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-left corner of the Image.

        \param top_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-right corner of the Image.

        \param bottom_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-left corner of the Image.

        \param bottom_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-right corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Vector3& position, const Size& size, const Rect& clip_rect, const colour& top_left_colour = 0xFFFFFFFF, const colour& top_right_colour = 0xFFFFFFFF, const colour& bottom_left_colour = 0xFFFFFFFF, const colour& bottom_right_colour = 0xFFFFFFFF, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const
        {
                draw(Rect(position.d_x, position.d_y, position.d_x + size.d_width, position.d_y + size.d_height), position.d_z, clip_rect, 
                        ColourRect(top_left_colour, top_right_colour, bottom_left_colour, bottom_right_colour), quad_split_mode);
        }


        /*!
        \brief
                Queue the image to be drawn.

        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param dest_rect
                Rect object defining the area on-screen where the Image is to be drawn.  The Image will be scaled to fit the area as required.

        \param z
                Z-order position for the image.  Positions increase "into the screen", so 0.0f is at the top of the z-order.

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param top_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-left corner of the Image.

        \param top_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-right corner of the Image.

        \param bottom_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-left corner of the Image.

        \param bottom_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-right corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Rect& dest_rect, float z, const Rect& clip_rect, const colour& top_left_colour = 0xFFFFFFFF, const colour& top_right_colour = 0xFFFFFFFF, const colour& bottom_left_colour = 0xFFFFFFFF, const colour& bottom_right_colour = 0xFFFFFFFF, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const
        {
                draw(dest_rect, z, clip_rect, ColourRect(top_left_colour, top_right_colour, bottom_left_colour, bottom_right_colour), quad_split_mode);
        }


        /*!
        \brief
                Queue the image to be drawn. 
                
        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param position
                Vector3 object containing the location where the Image is to be drawn

        \param size
                Size object describing the size that the Image is to be drawn at.

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param colours
                ColourRect object that describes the colour values to use for each corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Vector3& position, const Size& size, const Rect& clip_rect, const ColourRect& colours, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const
        {
                draw(Rect(position.d_x, position.d_y, position.d_x + size.d_width, position.d_y + size.d_height), position.d_z, clip_rect, colours, quad_split_mode);
        }


        /*!
        \brief
                Queue the image to be drawn.

        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param position
                Vector3 object containing the location where the Image is to be drawn

        \note
                The image will be drawn at it's internally defined size.

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param colours
                ColourRect object that describes the colour values to use for each corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Vector3& position, const Rect& clip_rect, const ColourRect& colours, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const
        {
                draw(Rect(position.d_x, position.d_y, position.d_x + getWidth(), position.d_y + getHeight()), position.d_z, clip_rect, colours, quad_split_mode);
        }


        /*!
        \brief
                Queue the image to be drawn.

        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param position
                Vector3 object containing the location where the Image is to be drawn

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param top_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-left corner of the Image.

        \param top_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the top-right corner of the Image.

        \param bottom_left_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-left corner of the Image.

        \param bottom_right_colour
                Colour (as 0xAARRGGBB value) to be applied to the bottom-right corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Vector3& position, const Rect& clip_rect, const colour& top_left_colour = 0xFFFFFFFF, const colour& top_right_colour = 0xFFFFFFFF, const colour& bottom_left_colour = 0xFFFFFFFF, const colour& bottom_right_colour = 0xFFFFFFFF, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const
        {
                draw(Rect(position.d_x, position.d_y, position.d_x + getWidth(), position.d_y + getHeight()), position.d_z, clip_rect, ColourRect(top_left_colour, top_right_colour, bottom_left_colour, bottom_right_colour), quad_split_mode);
        }


        /*!
        \brief
                Queue the image to be drawn.

        \note
                The final position of the Image will be adjusted by the offset values defined for this Image object.  If absolute positioning is
                essential then these values should be taken into account prior to calling the draw() methods.  However, by doing this you take
                away the ability of the Imageset designer to adjust the alignment and positioning of Images, therefore your component is far
                less useful since it requires code changes to modify image positioning that could have been handled from a data file.

        \param dest_rect
                Rect object defining the area on-screen where the Image is to be drawn.  The Image will be scaled to fit the area as required.

        \param z
                Z-order position for the image.  Positions increase "into the screen", so 0.0f is at the top of the z-order.

        \param clip_rect
                Rect object that defines an on-screen area that the Image will be clipped to when drawing.

        \param colours
                ColourRect object that describes the colour values to use for each corner of the Image.
        
        \param quad_split_mode
                One of the QuadSplitMode values specifying the way quads are split into triangles

        \return
                Nothing
        */
        void    draw(const Rect& dest_rect, float z, const Rect& clip_rect,const ColourRect& colours, QuadSplitMode quad_split_mode = TopLeftToBottomRight) const;



        friend class std::map<String, Image>;
        friend struct std::pair<const String, Image>;


        /*************************************************************************
                Construction and Destruction
        *************************************************************************/
        /*!
        \brief
                Default constructor (only used by std::map)
        */
        Image(void) {}


        /*!
        \brief
                Constructor for Image objects.  This is not normally used directly by client code, use the Imageset interface instead.

        \param owner
                Pointer to a Imageset object that owns this Image.  This must not be NULL.
                
        \param name
                String object describing the name of the image being created.
                
        \param area
                Rect object describing an area that will be associated with this image.
                
        \param render_offset
                Point object that describes the offset to be applied when rendering this image.
                
        \param horzScaling
                float value indicating the initial horizontal scaling to be applied to this image.

        \param vertScaling
                float value indicating the initial vertical scaling to be applied to this image.

        \exception NullObjectException  Thrown if \a owner was NULL.
        */
        Image(const Imageset* owner, const String& name, const Rect& area, const Point& render_offset, float horzScaling = 1.0f, float vertScaling = 1.0f);



        /*!
        \brief
                Copy constructor
        */
        Image(const Image& image);


        /*!
        \brief
                Destructor for Image objects.
        */
        ~Image(void);


private:
        /*************************************************************************
                Friends
        *************************************************************************/
        friend class Imageset;

                
        /*************************************************************************
                Implementation Methods
        *************************************************************************/
        /*!
        \brief
                set the horizontal scaling factor to be applied to this Image

        \param factor
                float value describing the scaling factor required.

        \return
                Nothing.
        */
        void    setHorzScaling(float factor);


        /*!
        \brief
                set the vertical scaling factor to be applied to this Image

        \param factor
                float value describing the scaling factor required.

        \return
                Nothing.
        */
        void    setVertScaling(float factor);


        /*************************************************************************
                Implementation Data
        *************************************************************************/
        const Imageset* d_owner;                //!< Link back to Imageset that owns this image
        Rect                    d_area;                 //!< Rect defining the area on the texture that makes up this image.
        Point                   d_offset;               //!< Offset to use when rendering

        // image auto-scaling fields.
        float   d_scaledWidth;          //!< scaled image width.
        float   d_scaledHeight;         //!< scaled image height.
        Point   d_scaledOffset;         //!< scaled rendering offset.
        String  d_name;                         //!< name of this image.
};

} // End of  CEGUI namespace section

#if defined(_MSC_VER)
#       pragma warning(pop)
#endif

#endif  // end of guard _CEGUIImage_h_