source: GTP/trunk/App/Demos/Illum/pathmap/xmlParser.h @ 2197

Revision 2197, 28.3 KB checked in by szirmay, 18 years ago (diff)
RevLine 
[2197]1/**
2 ****************************************************************************
3 * <P> XML.c - implementation file for basic XML parser written in ANSI C++
4 * for portability. It works by using recursion and a node tree for breaking
5 * down the elements of an XML document.  </P>
6 *
7 * @version     V2.20
8 * @author      Frank Vanden Berghen
9 *
10 * BSD license:
11 * Copyright (c) 2002, Frank Vanden Berghen
12 * All rights reserved.
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions are met:
15 *
16 *     * Redistributions of source code must retain the above copyright
17 *       notice, this list of conditions and the following disclaimer.
18 *     * Redistributions in binary form must reproduce the above copyright
19 *       notice, this list of conditions and the following disclaimer in the
20 *       documentation and/or other materials provided with the distribution.
21 *     * Neither the name of the Frank Vanden Berghen nor the
22 *       names of its contributors may be used to endorse or promote products
23 *       derived from this software without specific prior written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY
26 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
27 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
28 * DISCLAIMED. IN NO EVENT SHALL THE REGENTS AND CONTRIBUTORS BE LIABLE FOR ANY
29 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
30 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
31 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
32 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
34 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 *
36 ****************************************************************************
37 */
38#ifndef __INCLUDE_XML_NODE__
39#define __INCLUDE_XML_NODE__
40
41#include <stdlib.h>
42
43#ifdef _UNICODE
44// If you comment the next "define" line then the library will never "switch to" _UNICODE (wchar_t*) mode (16/32 bits per characters).
45// This is useful when you get error messages like:
46//    'XMLNode::openFileHelper' : cannot convert parameter 2 from 'const char [5]' to 'const wchar_t *'
47// The _XMLUNICODE preprocessor variable force the XMLParser library into either utf16/32-mode (the proprocessor variable
48// must be defined) or utf8-mode(the pre-processor variable must be undefined).
49#define _XMLUNICODE
50#endif
51
52#if defined(WIN32) || defined(UNDER_CE)
53// comment the next line if you are under windows and the compiler is not Microsoft Visual Studio (6.0 or .NET)
54#define _XMLWINDOWS
55
56#ifdef _USE_XMLPARSER_DLL
57#ifdef _DLL_EXPORTS_
58#define DLLENTRY __declspec(dllexport)
59#else
60#define DLLENTRY __declspec(dllimport)
61#endif
62#else
63#define DLLENTRY
64#endif
65
66#endif
67
68// uncomment the next line if you want no support for wchar_t* (no need for the <wchar.h> or <tchar.h> libraries anymore to compile)
69//#define XML_NO_WIDE_CHAR
70
71#ifdef XML_NO_WIDE_CHAR
72#undef _XMLWINDOWS
73#undef _XMLUNICODE
74#endif
75
76#ifdef _XMLWINDOWS
77#include <tchar.h>
78#else
79#define DLLENTRY
80#ifndef XML_NO_WIDE_CHAR
81#include <wchar.h> // to have 'wcsrtombs' for ANSI version
82                   // to have 'mbsrtowcs' for UNICODE version
83#endif
84#endif
85
86// Some common types for char set portable code
87#ifdef _XMLUNICODE
88    #ifndef _T
89        #define _T(c) L ## c
90    #endif
91    #define XMLCSTR const wchar_t *
92    #define XMLSTR  wchar_t *
93    #define XMLCHAR wchar_t
94#else
95    #ifndef _T
96        #define _T(c) c
97    #endif
98    #define XMLCSTR const char *
99    #define XMLSTR  char *
100    #define XMLCHAR char
101#endif
102#ifndef FALSE
103    #define FALSE 0
104#endif /* FALSE */
105#ifndef TRUE
106    #define TRUE 1
107#endif /* TRUE */
108
109
110// Enumeration for XML parse errors.
111typedef enum XMLError
112{
113    eXMLErrorNone = 0,
114    eXMLErrorMissingEndTag,
115    eXMLErrorEmpty,
116    eXMLErrorFirstNotStartTag,
117    eXMLErrorMissingTagName,
118    eXMLErrorMissingEndTagName,
119    eXMLErrorNoMatchingQuote,
120    eXMLErrorUnmatchedEndTag,
121    eXMLErrorUnmatchedEndClearTag,
122    eXMLErrorUnexpectedToken,
123    eXMLErrorInvalidTag,
124    eXMLErrorNoElements,
125    eXMLErrorFileNotFound,
126    eXMLErrorFirstTagNotFound,
127    eXMLErrorUnknownCharacterEntity,
128    eXMLErrorCharConversionError,
129    eXMLErrorCannotOpenWriteFile,
130    eXMLErrorCannotWriteFile,
131
132    eXMLErrorBase64DataSizeIsNotMultipleOf4,
133    eXMLErrorBase64DecodeIllegalCharacter,
134    eXMLErrorBase64DecodeTruncatedData,
135    eXMLErrorBase64DecodeBufferTooSmall
136} XMLError;
137
138// Enumeration used to manage type of data. Use in conjunction with structure XMLNodeContents
139typedef enum XMLElementType
140{
141    eNodeChild=0,
142    eNodeAttribute=1,
143    eNodeText=2,
144    eNodeClear=3,
145    eNodeNULL=4
146} XMLElementType;
147
148// Structure used to obtain error details if the parse fails.
149typedef struct XMLResults
150{
151    enum XMLError error;
152    int  nLine,nColumn;
153} XMLResults;
154
155// Structure for XML clear (unformatted) node (usually comments)
156typedef struct {
157    XMLCSTR lpszValue; XMLCSTR lpszOpenTag; XMLCSTR lpszCloseTag;
158} XMLClear;
159
160// Structure for XML attribute.
161typedef struct {
162    XMLCSTR lpszName; XMLCSTR lpszValue;
163} XMLAttribute;
164
165// Structure for XML clear tags.
166typedef struct {
167    XMLCSTR lpszOpen; int openTagLen; XMLCSTR lpszClose;
168} ALLXMLClearTag;
169
170struct XMLNodeContents;
171
172typedef struct DLLENTRY XMLNode
173{
174  private:
175
176    struct XMLNodeDataTag;
177
178    // protected constructors: use one of these four methods to get your first instance of XMLNode:
179    //  - parseString
180    //  - parseFile
181    //  - openFileHelper
182    //  - createXMLTopNode
183    XMLNode(struct XMLNodeDataTag *pParent, XMLCSTR lpszName, char isDeclaration);
184    XMLNode(struct XMLNodeDataTag *p);
185
186  public:
187
188    // You can create your first instance of XMLNode with these 4 functions:
189    // (see complete explanation of parameters below)
190
191    static XMLNode createXMLTopNode(XMLCSTR lpszName, char isDeclaration=FALSE);
192    static XMLNode parseString   (XMLCSTR  lpXMLString, XMLCSTR tag=NULL, XMLResults *pResults=NULL);
193    static XMLNode parseFile     (XMLCSTR     filename, XMLCSTR tag=NULL, XMLResults *pResults=NULL);
194    static XMLNode openFileHelper(XMLCSTR     filename, XMLCSTR tag=NULL                           );
195
196    // The tag parameter should be the name of the first tag inside the XML file.
197    // If the tag parameter is omitted, the 3 functions return a node that represents
198    // the head of the xml document including the declaration term (<? ... ?>).
199
200    // The "openFileHelper" reports to the screen all the warnings & errors that occurred during
201    // parsing of the XML file. Since each application has its own way to report and deal with errors,
202    // you should rather use the "parseFile" function to parse XML files and program yourself thereafter
203    // an "error reporting" tailored for your needs (instead of using the very crude "error reporting"
204    // mechanism included inside the "openFileHelper" function).
205
206    // If the XML document is corrupted:
207    //   * The "openFileHelper" method will:
208    //         - display an error message on the console (or inside a messageBox for windows).
209    //         - stop execution (exit).
210    //     I suggest that you write your own "openFileHelper" method tailored to your needs.
211    //   * The 2 other methods will initialize the "pResults" variable with some information that
212    //     can be used to trace the error.
213    //   * If you still want to parse the file, you can use the APPROXIMATE_PARSING option as
214    //     explained inside the note at the beginning of the "xmlParser.cpp" file.
215    // You can have a user-friendly explanation of the parsing error with this function:
216    static XMLCSTR getError(XMLError error);
217    static XMLCSTR getVersion();
218    static ALLXMLClearTag* getClearTagTable();
219
220    XMLCSTR getName() const;                                         // name of the node
221    XMLCSTR getText(int i=0) const;                                  // return ith text field
222    int nText() const;                                               // nbr of text field
223    XMLNode getParentNode() const;                                   // return the parent node
224    XMLNode getChildNode(int i=0) const;                             // return ith child node
225    XMLNode getChildNode(XMLCSTR name, int i)  const;                // return ith child node with specific name
226                                                                     //     (return an empty node if failing)
227    XMLNode getChildNode(XMLCSTR name, int *i=NULL) const;           // return next child node with specific name
228                                                                     //     (return an empty node if failing)
229        XMLNode operator/(XMLCSTR name);
230        XMLNode getChildNodeWithAttribute(XMLCSTR tagName,               // return child node with specific name/attribute
231                                      XMLCSTR attributeName,         //     (return an empty node if failing)
232                                      XMLCSTR attributeValue=NULL,   //
233                                      int *i=NULL)  const;           //
234    int nChildNode(XMLCSTR name) const;                              // return the number of child node with specific name
235    int nChildNode() const;                                          // nbr of child node
236    XMLAttribute getAttribute(int i=0) const;                        // return ith attribute
237    XMLCSTR      getAttributeName(int i=0) const;                    // return ith attribute name
238    XMLCSTR      getAttributeValue(int i=0) const;                   // return ith attribute value
239    char  isAttributeSet(XMLCSTR name) const;                        // test if an attribute with a specific name is given
240    XMLCSTR getAttribute(XMLCSTR name, int i) const;                 // return ith attribute content with specific name
241                                                                     //     (return a NULL if failing)
242    XMLCSTR getAttribute(XMLCSTR name, int *i=NULL) const;           // return next attribute content with specific name
243                                                                     //     (return a NULL if failing)
244        XMLCSTR operator|(XMLCSTR name);
245    int nAttribute() const;                                          // nbr of attribute
246    XMLClear getClear(int i=0) const;                                // return ith clear field (comments)
247    int nClear() const;                                              // nbr of clear field
248    XMLSTR createXMLString(int nFormat=1, int *pnSize=NULL) const;   // create XML string starting from current XMLNode
249                                                                     // if nFormat==0, no formatting is required
250                                                                     // otherwise this returns an user friendly XML string from a
251                                                                     // given element with appropriate white spaces and carriage returns.
252                                                                     // if pnSize is given it returns the size in character of the string.
253    XMLError writeToFile(XMLCSTR filename, const char *encoding=NULL, char nFormat=1) const;
254                                                                     // save the content of an xmlNode inside a file.
255                                                                     // the nFormat parameter has the same meaning as in the
256                                                                     // createXMLString function. If "strictUTF8Parsing=1", the
257                                                                     // the encoding parameter is ignored and always set to
258                                                                     // "utf-8". If "_XMLUNICODE=1", the encoding parameter is
259                                                                     // ignored and always set to "utf-16".
260    XMLNodeContents enumContents(int i) const;                       // enumerate all the different contents (attribute,child,text,
261                                                                     //     clear) of the current XMLNode. The order is reflecting
262                                                                     //     the order of the original file/string.
263                                                                     //     NOTE: 0 <= i < nElement();
264    int nElement() const;                                            // nbr of different contents for current node
265    char isEmpty() const;                                            // is this node Empty?
266    char isDeclaration() const;                                      // is this node a declaration <? .... ?>
267
268// to allow shallow/fast copy:
269    ~XMLNode();
270    XMLNode(const XMLNode &A);
271    XMLNode& operator=( const XMLNode& A );
272
273    XMLNode(): d(NULL){};
274    static XMLNode emptyXMLNode;
275    static XMLClear emptyXMLClear;
276    static XMLAttribute emptyXMLAttribute;
277
278    // The following functions allows you to create from scratch (or update) a XMLNode structure
279    // Start by creating your top node with the "createXMLTopNode" function and then add new nodes with the "addChild" function.
280    // The parameter 'pos' gives the position where the childNode, the text or the XMLClearTag will be inserted.
281    // The default value (pos=-1) inserts at the end. The value (pos=0) insert at the beginning (Insertion at the beginning is slower than at the end).
282    // REMARK: 0 <= pos < nChild()+nText()+nClear()
283    XMLNode       addChild(XMLCSTR lpszName, char isDeclaration=FALSE, int pos=-1);
284    XMLAttribute *addAttribute(XMLCSTR lpszName, XMLCSTR lpszValuev);
285    XMLCSTR       addText(XMLCSTR lpszValue, int pos=-1);
286    XMLClear     *addClear(XMLCSTR lpszValue, XMLCSTR lpszOpen=NULL, XMLCSTR lpszClose=NULL, int pos=-1);
287                                                                    // default values: lpszOpen=XMLNode::getClearTagTable()->lpszOpen;
288                                                                    //                 lpszClose=XMLNode::getClearTagTable()->lpszClose;
289    XMLNode       addChild(XMLNode nodeToAdd, int pos=-1);          // If the "nodeToAdd" has some parents, it will be detached
290                                                                    // from it's parents before being attached to the current XMLNode
291    // Some update functions:
292    XMLCSTR       updateName(XMLCSTR lpszName);                                                    // change node's name
293    XMLAttribute *updateAttribute(XMLAttribute *newAttribute, XMLAttribute *oldAttribute);         // if the attribute to update is missing, a new one will be added
294    XMLAttribute *updateAttribute(XMLCSTR lpszNewValue, XMLCSTR lpszNewName=NULL,int i=0);         // if the attribute to update is missing, a new one will be added
295    XMLAttribute *updateAttribute(XMLCSTR lpszNewValue, XMLCSTR lpszNewName,XMLCSTR lpszOldName);  // set lpszNewName=NULL if you don't want to change the name of the attribute
296                                                                                                   // if the attribute to update is missing, a new one will be added
297    XMLCSTR       updateText(XMLCSTR lpszNewValue, int i=0);                                       // if the text to update is missing, a new one will be added
298    XMLCSTR       updateText(XMLCSTR lpszNewValue, XMLCSTR lpszOldValue);                          // if the text to update is missing, a new one will be added
299    XMLClear     *updateClear(XMLCSTR lpszNewContent, int i=0);                                    // if the clearTag to update is missing, a new one will be added
300    XMLClear     *updateClear(XMLClear *newP,XMLClear *oldP);                                      // if the clearTag to update is missing, a new one will be added
301    XMLClear     *updateClear(XMLCSTR lpszNewValue, XMLCSTR lpszOldValue);                         // if the clearTag to update is missing, a new one will be added
302
303    // Some deletion functions:
304    void deleteNodeContent(char force=0);  // delete the content of this XMLNode and the subtree.
305                                           // if force=0, while (references to this node still exist), no memory free occurs
306                                           // if force=1, always delete the content of this XMLNode and the subtree and free associated memory
307    void deleteAttribute(XMLCSTR lpszName);
308    void deleteAttribute(int i=0);
309    void deleteAttribute(XMLAttribute *anAttribute);
310    void deleteText(int i=0);
311    void deleteText(XMLCSTR lpszValue);
312    void deleteClear(int i=0);
313    void deleteClear(XMLClear *p);
314    void deleteClear(XMLCSTR lpszValue);
315
316    // The strings given as parameters for the following add and update methods (all these methods have
317    // a name with the postfix "_WOSD" that means "WithOut String Duplication" ) will be free'd by the
318    // XMLNode class. For example, it means that this is incorrect:
319    //    xNode.addText_WOSD("foo");
320    //    xNode.updateAttribute_WOSD("#newcolor" ,NULL,"color");
321    // In opposition, this is correct:
322    //    xNode.addText("foo");
323    //    xNode.addText_WOSD(stringDup("foo"));
324    //    xNode.updateAttribute("#newcolor" ,NULL,"color");
325    //    xNode.updateAttribute_WOSD(stringDup("#newcolor"),NULL,"color");
326    // Typically, you will never do:
327    //    char *b=(char*)malloc(...);
328    //    xNode.addText(b);
329    //    free(b);
330    // ... but rather:
331    //    char *b=(char*)malloc(...);
332    //    xNode.addText_WOSD(b);
333    //    ('free(b)' is performed by the XMLNode class)
334
335    static XMLNode createXMLTopNode_WOSD(XMLCSTR lpszName, char isDeclaration=FALSE);
336    XMLNode        addChild_WOSD(XMLCSTR lpszName, char isDeclaration=FALSE, int pos=-1);
337    XMLAttribute  *addAttribute_WOSD(XMLCSTR lpszName, XMLCSTR lpszValue);
338    XMLCSTR        addText_WOSD(XMLCSTR lpszValue, int pos=-1);
339    XMLClear      *addClear_WOSD(XMLCSTR lpszValue, XMLCSTR lpszOpen=NULL, XMLCSTR lpszClose=NULL, int pos=-1);
340
341    XMLCSTR        updateName_WOSD(XMLCSTR lpszName);
342    XMLAttribute  *updateAttribute_WOSD(XMLAttribute *newAttribute, XMLAttribute *oldAttribute);
343    XMLAttribute  *updateAttribute_WOSD(XMLCSTR lpszNewValue, XMLCSTR lpszNewName=NULL,int i=0);
344    XMLAttribute  *updateAttribute_WOSD(XMLCSTR lpszNewValue, XMLCSTR lpszNewName,XMLCSTR lpszOldName);
345    XMLCSTR        updateText_WOSD(XMLCSTR lpszNewValue, int i=0);
346    XMLCSTR        updateText_WOSD(XMLCSTR lpszNewValue, XMLCSTR lpszOldValue);
347    XMLClear      *updateClear_WOSD(XMLCSTR lpszNewContent, int i=0);
348    XMLClear      *updateClear_WOSD(XMLClear *newP,XMLClear *oldP);
349    XMLClear      *updateClear_WOSD(XMLCSTR lpszNewValue, XMLCSTR lpszOldValue);
350
351    // These are some useful functions when you want to insert a childNode, a text or a XMLClearTag in the
352    // middle (at a specified position) of a XMLNode tree already constructed. The value returned by these
353    // methods is to be used as last parameter (parameter 'pos') of addChild, addText or addClear.
354    int positionOfText(int i=0) const;
355    int positionOfText(XMLCSTR lpszValue) const;
356    int positionOfClear(int i=0) const;
357    int positionOfClear(XMLCSTR lpszValue) const;
358    int positionOfClear(XMLClear *a) const;
359    int positionOfChildNode(int i=0) const;
360    int positionOfChildNode(XMLNode x) const;
361    int positionOfChildNode(XMLCSTR name, int i=0) const; // return the position of the ith childNode with the specified name
362                                                          // if (name==NULL) return the position of the ith childNode
363
364    // The setGlobalOptions function allows you to change two global parameters that affect string&file
365    // parsing. First of all, you most-probably will never have to change these 2 global parameters.
366    // About the "guessUnicodeChars" parameter:
367    //     If "guessUnicodeChars=1" and if this library is compiled in UNICODE mode, then the
368    //     "parseFile" and "openFileHelper" functions will test if the file contains ASCII
369    //     characters. If this is the case, then the file will be loaded and converted in memory to
370    //     UNICODE before being parsed. If "guessUnicodeChars=0", no conversion will
371    //     be performed.
372    //
373    //     If "guessUnicodeChars=1" and if this library is compiled in ASCII/UTF8 mode, then the
374    //     "parseFile" and "openFileHelper" functions will test if the file contains UNICODE
375    //     characters. If this is the case, then the file will be loaded and converted in memory to
376    //     ASCII/UTF8 before being parsed. If "guessUnicodeChars=0", no conversion will
377    //     be performed
378    //
379    //     Sometime, it's useful to set "guessUnicodeChars=0" to disable any conversion
380    //     because the test to detect the file-type (ASCII/UTF8 or UNICODE) may fail (rarely).
381    //
382    // About the "strictUTF8Parsing" parameter:
383    //     If "strictUTF8Parsing=0" then we assume that all characters have the same length of 1 byte.
384    //     If "strictUTF8Parsing=1" then the characters have different lengths (from 1 byte to 4 bytes)
385    //     depending on the content of the first byte of the character.
386    // About the "dropWhiteSpace" parameter:
387    //
388
389    static void setGlobalOptions(char guessUnicodeChars=1, char strictUTF8Parsing=1, char dropWhiteSpace=1);
390
391    // The next function try to guess if the character encoding is UTF-8. You most-probably will never
392    // have to use this function. It then returns the appropriate value of the global parameter
393    // "strictUTF8Parsing" described above. The guess is based on the content of a buffer of length
394    // "bufLen" bytes that contains the first bytes (minimum 25 bytes; 200 bytes is a good value) of the
395    // file to be parsed. The "openFileHelper" function is using this function to automatically compute
396    // the value of the "strictUTF8Parsing" global parameter. There are several heuristics used to do the
397    // guess. One of the heuristic is based on the "encoding" attribute. The original XML specifications
398    // forbids to use this attribute to do the guess but you can still use it if you set
399    // "useXMLEncodingAttribute" to 1 (this is the default behavior and the behavior of most parsers).
400
401    static char guessUTF8ParsingParameterValue(void *buffer, int bufLen, char useXMLEncodingAttribute=1);
402
403  private:
404
405// these are functions and structures used internally by the XMLNode class (don't bother about them):
406
407      typedef struct XMLNodeDataTag // to allow shallow copy and "intelligent/smart" pointers (automatic delete):
408      {
409          XMLCSTR                lpszName;        // Element name (=NULL if root)
410          int                    nChild,          // Number of child nodes
411                                 nText,           // Number of text fields
412                                 nClear,          // Number of Clear fields (comments)
413                                 nAttribute;      // Number of attributes
414          char                   isDeclaration;   // Whether node is an XML declaration - '<?xml ?>'
415          struct XMLNodeDataTag  *pParent;        // Pointer to parent element (=NULL if root)
416          XMLNode                *pChild;         // Array of child nodes
417          XMLCSTR                *pText;          // Array of text fields
418          XMLClear               *pClear;         // Array of clear fields
419          XMLAttribute           *pAttribute;     // Array of attributes
420          int                    *pOrder;         // order of the child_nodes,text_fields,clear_fields
421          int                    ref_count;       // for garbage collection (smart pointers)
422      } XMLNodeData;
423      XMLNodeData *d;
424
425      char parseClearTag(void *px, ALLXMLClearTag *pa);
426      char maybeAddTxT(void *pa, XMLCSTR tokenPStr);
427      int ParseXMLElement(void *pXML);
428      void *addToOrder(int *_pos, int nc, void *p, int size, XMLElementType xtype);
429      int indexText(XMLCSTR lpszValue) const;
430      int indexClear(XMLCSTR lpszValue) const;
431      static inline int findPosition(XMLNodeData *d, int index, XMLElementType xtype);
432      static int CreateXMLStringR(XMLNodeData *pEntry, XMLSTR lpszMarker, int nFormat);
433      static int removeOrderElement(XMLNodeData *d, XMLElementType t, int index);
434      static void exactMemory(XMLNodeData *d);
435      static int detachFromParent(XMLNodeData *d);
436} XMLNode;
437
438// This structure is given by the function "enumContents".
439typedef struct XMLNodeContents
440{
441    // This dictates what's the content of the XMLNodeContent
442    enum XMLElementType type;
443    // should be an union to access the appropriate data.
444    // compiler does not allow union of object with constructor... too bad.
445    XMLNode child;
446    XMLAttribute attrib;
447    XMLCSTR text;
448    XMLClear clear;
449
450} XMLNodeContents;
451
452DLLENTRY void free_XMLDLL(void *t); // {free(t);}
453
454// Duplicate (copy in a new allocated buffer) the source string. This is
455// a very handy function when used with all the "XMLNode::*_WOSD" functions.
456// (If (cbData!=0) then cbData is the number of chars to duplicate)
457DLLENTRY XMLSTR stringDup(XMLCSTR source, int cbData=0);
458
459// The 3 following functions are processing strings so that all the characters
460// &,",',<,> are replaced by their XML equivalent: &amp;, &quot;, &apos;, &lt;, &gt;.
461// These 3 functions are useful when creating from scratch an XML file using the
462// "printf", "fprintf", "cout",... functions. If you are creating from scratch an
463// XML file using the provided XMLNode class you cannot use these functions (the
464// XMLNode class does the processing job for you during rendering). The second
465// function ("toXMLStringFast") allows you to re-use the same output buffer
466// for all the conversions so that only a few memory allocations are performed.
467// If the output buffer is too small to contain thee resulting string, it will
468// be enlarged.
469DLLENTRY XMLSTR toXMLString(XMLCSTR source);
470DLLENTRY XMLSTR toXMLStringFast(XMLSTR *destBuffer,int *destSz, XMLCSTR source);
471
472// you should not use this one (there is a possibility of "destination-buffer-overflow"):
473DLLENTRY XMLSTR toXMLString(XMLSTR dest,XMLCSTR source);
474
475// Below is a class that allows you to include any binary data (images, sounds,...)
476// into an XML document using "Base64 encoding". This class is completely
477// separated from the rest of the xmlParser library and can be removed without any problem.
478// To include some binary data into an XML file, you must convert the binary data into
479// standard text (using "encode"). To retrieve the original binary data from the
480// b64-encoded text included inside the XML file use "decode". Alternatively, these
481// functions can also be used to "encrypt/decrypt" some critical data contained inside
482// the XML.
483
484class DLLENTRY XMLParserBase64Tool
485{
486public:
487    XMLParserBase64Tool(): buf(NULL),buflen(0){}
488    ~XMLParserBase64Tool();
489
490    void freeBuffer();
491
492    // returns the length of the base64 string that encodes a data buffer of size inBufLen bytes.
493    // If "formatted" parameter is true, some space will be reserved for a carriage-return every 72 chars.
494    static int encodeLength(int inBufLen, char formatted=0);
495
496    // The "base64Encode" function returns a string containing the base64 encoding of "inByteLen" bytes
497    // from "inByteBuf". If "formatted" parameter is true, then there will be a carriage-return every 72 chars.
498    // The string will be free'd when the XMLParserBase64Tool object is deleted.
499    // All returned strings are sharing the same memory space.
500    XMLSTR encode(unsigned char *inByteBuf, unsigned int inByteLen, char formatted=0);
501
502    // returns the number of bytes which will be decoded from "inString".
503    static unsigned int decodeSize(XMLCSTR inString, XMLError *xe=NULL);
504
505    // returns a pointer to a buffer containing the binary data decoded from "inString"
506    // If "inString" is malformed NULL will be returned
507    // The output buffer will be free'd when the XMLParserBase64Tool object is deleted.
508    // All output buffer are sharing the same memory space.
509    unsigned char* decode(XMLCSTR inString, int *outByteLen=NULL, XMLError *xe=NULL);
510
511    // The next function is deprecated.
512    // decodes data from "inString" to "outByteBuf". You need to provide the size (in byte) of "outByteBuf"
513    // in "inMaxByteOutBuflen". If "outByteBuf" is not large enough or if data is malformed, then "FALSE"
514    // will be returned; otherwise "TRUE".
515    static unsigned char decode(XMLCSTR inString, unsigned char *outByteBuf, int inMaxByteOutBuflen, XMLError *xe=NULL);
516
517private:
518    void *buf;
519    int buflen;
520    void alloc(int newsize);
521};
522
523
524#endif
Note: See TracBrowser for help on using the repository browser.