source: GTP/trunk/Lib/Geom/OgreStuff/include/OgreEntity.h @ 1809

/*
-----------------------------------------------------------------------------
This source file is part of OGRE
(Object-oriented Graphics Rendering Engine)
For the latest info, see http://ogre.sourceforge.net/

Copyright (c) 2000-2005 The OGRE Team
Also see acknowledgements in Readme.html

This program is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.

This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place - Suite 330, Boston, MA 02111-1307, USA, or go to
http://www.gnu.org/copyleft/lesser.txt.
-----------------------------------------------------------------------------
*/
#ifndef __Entity_H__
#define __Entity_H__

#include "OgrePrerequisites.h"
#include "OgreCommon.h"

#include "OgreString.h"
#include "OgreMovableObject.h"
#include "OgreQuaternion.h"
#include "OgreVector3.h"
#include "OgreHardwareBufferManager.h"
#include "OgreMesh.h"

namespace Ogre {
        /** Defines an instance of a discrete, movable object based on a Mesh.
        @remarks
        Ogre generally divides renderable objects into 2 groups, discrete
        (separate) and relatively small objects which move around the world,
        and large, sprawling geometry which makes up generally immovable
        scenery, aka 'level geometry'.
        @par
        The Mesh and SubMesh classes deal with the definition of the geometry
        used by discrete movable objects. Entities are actual instances of
        objects based on this geometry in the world. Therefore there is
        usually a single set Mesh for a car, but there may be multiple
        entities based on it in the world. Entities are able to override
        aspects of the Mesh it is defined by, such as changing material
        properties per instance (so you can have many cars using the same
        geometry but different textures for example). Because a Mesh is split
        into SubMeshes for this purpose, the Entity class is a grouping class
        (much like the Mesh class) and much of the detail regarding
        individual changes is kept in the SubEntity class. There is a 1:1
        relationship between SubEntity instances and the SubMesh instances
        associated with the Mesh the Entity is based on.
        @par
        Entity and SubEntity classes are never created directly. Use the
        createEntity method of the SceneManager (passing a model name) to
        create one.
        @par
        Entities are included in the scene by associating them with a
        SceneNode, using the attachEntity method. See the SceneNode class
        for full information.
        @note
        No functions were declared virtual to improve performance.
        */
        class _OgreExport Entity: public MovableObject
        {
                // Allow EntityFactory full access
                friend class EntityFactory;
                friend class SubEntity;
        public:
                typedef std::set<Entity*> EntitySet;

        protected:

                /** Private constructor (instances cannot be created directly).
                */
                Entity();
                /** Private constructor - specify name (the usual constructor used).
                */
                Entity( const String& name, MeshPtr& mesh);

                /** The Mesh that this Entity is based on.
                */
                MeshPtr mMesh;

                /** List of SubEntities (point to SubMeshes).
                */
                typedef std::vector<SubEntity*> SubEntityList;
                SubEntityList mSubEntityList;


                /// State of animation for animable meshes
                AnimationStateSet* mAnimationState;


                /// Temp buffer details for software skeletal anim of shared geometry
                TempBlendedBufferInfo mTempSkelAnimInfo;
                /// Vertex data details for software skeletal anim of shared geometry
                VertexData* mSkelAnimVertexData;
                /// Temp buffer details for software vertex anim of shared geometry
                TempBlendedBufferInfo mTempVertexAnimInfo;
                /// Vertex data details for software vertex anim of shared geometry
                VertexData* mSoftwareVertexAnimVertexData;
                /// Vertex data details for hardware vertex anim of shared geometry
                /// - separate since we need to s/w anim for shadows whilst still altering
                ///   the vertex data for hardware morphing (pos2 binding)
                VertexData* mHardwareVertexAnimVertexData;
                /// Have we applied any vertex animation to shared geometry?
                bool mVertexAnimationAppliedThisFrame;
        /// Have the temp buffers already had their geometry prepared for use in rendering shadow volumes?
        bool mPreparedForShadowVolumes;

                /** Internal method - given vertex data which could be from the Mesh or
                any submesh, finds the temporary blend copy. */
                const VertexData* findBlendedVertexData(const VertexData* orig);
                /** Internal method - given vertex data which could be from the Mesh or
                any SubMesh, finds the corresponding SubEntity. */
                SubEntity* findSubEntityForVertexData(const VertexData* orig);

                /** Internal method for extracting metadata out of source vertex data
                for fast assignment of temporary buffers later. */
                void extractTempBufferInfo(VertexData* sourceData, TempBlendedBufferInfo* info);
                /** Internal method to clone vertex data definitions but to remove blend buffers. */
                VertexData* cloneVertexDataRemoveBlendInfo(const VertexData* source);
                /** Internal method for preparing this Entity for use in animation. */
                void prepareTempBlendBuffers(void);
                /** Mark all vertex data as so far unanimated.
                */
                void markBuffersUnusedForAnimation(void);
                /** Internal method to restore original vertex data where we didn't
                        perform any vertex animation this frame.
                */
                void restoreBuffersForUnusedAnimation(bool hardwareAnimation);

                /// Cached bone matrices, including any world transform
        Matrix4 *mBoneWorldMatrices;
        /// Cached bone matrices in skeleton local space, might shares with other entity instances.
                Matrix4 *mBoneMatrices;
                unsigned short mNumBoneMatrices;
                /// Records the last frame in which animation was updated
                unsigned long mFrameAnimationLastUpdated;

                /// Perform all the updates required for an animated entity
                void updateAnimation(void);

                /// Records the last frame in which the bones was updated
                /// It's a pointer because it can be shared between different entities with
                /// a shared skeleton.
                unsigned long *mFrameBonesLastUpdated;

                /**
                * A set of all the entities which shares a single SkeletonInstance.
                * This is only created if the entity is in fact sharing it's SkeletonInstance with
                * other Entities.
                */
                EntitySet* mSharedSkeletonEntities;

                /// Private method to cache bone matrices from skeleton
                void cacheBoneMatrices(void);

                /// Flag determines whether or not to display skeleton
                bool mDisplaySkeleton;
                /// Flag indicating whether hardware animation is supported by this entities materials
                bool mHardwareAnimation;
                /// Number of hardware poses supported by materials
                ushort mHardwarePoseCount;
                /// Flag indicating whether we have a vertex program in use on any of our subentities
                bool mVertexProgramInUse;
        /// Counter indicating number of requests for software animation.
        int mSoftwareAnimationRequests;
        /// Counter indicating number of requests for software blended normals.
        int mSoftwareAnimationNormalsRequests;


                /// The LOD number of the mesh to use, calculated by _notifyCurrentCamera
                ushort mMeshLodIndex;

                /// LOD bias factor, inverted for optimisation when calculating adjusted depth
                Real mMeshLodFactorInv;
                /// Index of minimum detail LOD (NB higher index is lower detail)
                ushort mMinMeshLodIndex;
                /// Index of maximum detail LOD (NB lower index is higher detail)
                ushort mMaxMeshLodIndex;

                /// LOD bias factor, inverted for optimisation when calculating adjusted depth
                Real mMaterialLodFactorInv;
                /// Index of minimum detail LOD (NB higher index is lower detail)
                ushort mMinMaterialLodIndex;
                /// Index of maximum detail LOD (NB lower index is higher detail)
                ushort mMaxMaterialLodIndex;

                /** List of LOD Entity instances (for manual LODs).
                We don't know when the mesh is using manual LODs whether one LOD to the next will have the
                same number of SubMeshes, therefore we have to allow a separate Entity list
                with each alternate one.
                */
                typedef std::vector<Entity*> LODEntityList;
                LODEntityList mLodEntityList;

                /** This Entity's personal copy of the skeleton, if skeletally animated
                */
                SkeletonInstance* mSkeletonInstance;

                /// Last parent xform
                Matrix4 mLastParentXform;

                /** Builds a list of SubEntities based on the SubMeshes contained in the Mesh. */
                void buildSubEntityList(MeshPtr& mesh, SubEntityList* sublist);

                /// internal implementation of attaching a 'child' object to this entity and assign the parent node to the child entity
                void attachObjectImpl(MovableObject *pMovable, TagPoint *pAttachingPoint);

                /// internal implementation of detaching a 'child' object of this entity and clear the parent node of the child entity
                void detachObjectImpl(MovableObject* pObject);

                /// internal implementation of detaching all 'child' objects of this entity
                void detachAllObjectsImpl(void);

                /// Trigger reevaluation of the kind of vertex processing in use
                void reevaluateVertexProcessing(void);

                /// Apply vertex animation
                void applyVertexAnimation(bool hardwareAnimation, bool stencilShadows);
                /// Initialise the hardware animation elements for given vertex data
                void initHardwareAnimationElements(VertexData* vdata,
                        ushort numberOfElements);
                /// Are software vertex animation temp buffers bound?
                bool tempVertexAnimBuffersBound(void) const;
        /// Are software skeleton animation temp buffers bound?
        bool tempSkelAnimBuffersBound(bool requestNormals) const;

        public:
                /// Contains the child objects (attached to bones) indexed by name
                typedef std::map<String, MovableObject*> ChildObjectList;
        protected:
                ChildObjectList mChildObjectList;


                /// Bounding box that 'contains' all the mesh of each child entity
                mutable AxisAlignedBox mFullBoundingBox;

                bool mNormaliseNormals;

                ShadowRenderableList mShadowRenderables;

                /** Nested class to allow entity shadows. */
                class _OgreExport EntityShadowRenderable : public ShadowRenderable
                {
                protected:
                        Entity* mParent;
                        // Shared link to position buffer
                        HardwareVertexBufferSharedPtr mPositionBuffer;
                        // Shared link to w-coord buffer (optional)
                        HardwareVertexBufferSharedPtr mWBuffer;
                        // Link to current vertex data used to bind (maybe changes)
                        const VertexData* mCurrentVertexData;
                        // Original position buffer source binding
                        unsigned short mOriginalPosBufferBinding;
                        /// Link to SubEntity, only present if SubEntity has it's own geometry
                        SubEntity* mSubEntity;


                public:
                        EntityShadowRenderable(Entity* parent,
                                HardwareIndexBufferSharedPtr* indexBuffer, const VertexData* vertexData,
                                bool createSeparateLightCap, SubEntity* subent, bool isLightCap = false);
                        ~EntityShadowRenderable();
                        /// Overridden from ShadowRenderable
                        void getWorldTransforms(Matrix4* xform) const;
                        /// Overridden from ShadowRenderable
                        const Quaternion& getWorldOrientation(void) const;
                        /// Overridden from ShadowRenderable
                        const Vector3& getWorldPosition(void) const;
                        HardwareVertexBufferSharedPtr getPositionBuffer(void) { return mPositionBuffer; }
                        HardwareVertexBufferSharedPtr getWBuffer(void) { return mWBuffer; }
                        /// Rebind the source positions (for temp buffer users)
                        void rebindPositionBuffer(const VertexData* vertexData, bool force);
                        /// Overridden from ShadowRenderable
                        bool isVisible(void) const;

                };
        public:
                /** Default destructor.
                */
                ~Entity();

                /** Gets the Mesh that this Entity is based on.
                */
                const MeshPtr& getMesh(void) const;

                /** Gets a pointer to a SubEntity, ie a part of an Entity.
                */
                SubEntity* getSubEntity(unsigned int index) const;

                /** Gets a pointer to a SubEntity by name
                @remarks - names should be initialized during a Mesh creation.
                */
                SubEntity* getSubEntity( const String& name ) const;

                /** Retrieves the number of SubEntity objects making up this entity.
                */
                unsigned int getNumSubEntities(void) const;

                /** Clones this entity and returns a pointer to the clone.
                @remarks
                Useful method for duplicating an entity. The new entity must be
                given a unique name, and is not attached to the scene in any way
                so must be attached to a SceneNode to be visible (exactly as
                entities returned from SceneManager::createEntity).
                @param
                newName Name for the new entity.
                */
                Entity* clone( const String& newName ) const;

                /** Sets the material to use for the whole of this entity.
                @remarks
                This is a shortcut method to set all the materials for all
                subentities of this entity. Only use this method is you want to
                set the same material for all subentities or if you know there
                is only one. Otherwise call getSubEntity() and call the same
                method on the individual SubEntity.
                */
                void setMaterialName(const String& name);

                /** Overridden - see MovableObject.
                */
                void _notifyCurrentCamera(Camera* cam);

                /// Overridden - see MovableObject.
                void setRenderQueueGroup(uint8 queueID);

                /** Overridden - see MovableObject.
                */
                const AxisAlignedBox& getBoundingBox(void) const;

                /// merge all the child object Bounds a return it
                AxisAlignedBox getChildObjectsBoundingBox(void) const;

                /** Overridden - see MovableObject.
                */
                void _updateRenderQueue(RenderQueue* queue);

                /** Overridden from MovableObject */
                const String& getMovableType(void) const;

                /** For entities based on animated meshes, gets the AnimationState object for a single animation.
                @remarks
                You animate an entity by updating the animation state objects. Each of these represents the
                current state of each animation available to the entity. The AnimationState objects are
                initialised from the Mesh object.
                */
                AnimationState* getAnimationState(const String& name) const;
                /** For entities based on animated meshes, gets the AnimationState objects for all animations.
                @returns
                In case the entity is animated, this functions returns the pointer to a AnimationStateSet
                containing all animations of the entries. If the entity is not animated, it returns 0.
                @remarks
                You animate an entity by updating the animation state objects. Each of these represents the
                current state of each animation available to the entity. The AnimationState objects are
                initialised from the Mesh object.
                */
                AnimationStateSet* getAllAnimationStates(void) const;

                /** Tells the Entity whether or not it should display it's skeleton, if it has one.
                */
                void setDisplaySkeleton(bool display);

                /** Returns whether or not the entity is currently displaying its skeleton.
                */
                bool getDisplaySkeleton(void) const;


        /** Gets a pointer to the entity representing the numbered manual level of detail.
        @remarks
            The zero-based index never includes the original entity, unlike
                        Mesh::getLodLevel.
        */
        Entity* getManualLodLevel(size_t index) const;

        /** Returns the number of manual levels of detail that this entity supports.
        @remarks
            This number never includes the original entity, it is difference
            with Mesh::getNumLodLevels.
        */
        size_t getNumManualLodLevels(void) const;

                /** Sets a level-of-detail bias for the mesh detail of this entity.
                @remarks
                Level of detail reduction is normally applied automatically based on the Mesh
                settings. However, it is possible to influence this behaviour for this entity
                by adjusting the LOD bias. This 'nudges' the mesh level of detail used for this
                entity up or down depending on your requirements. You might want to use this
                if there was a particularly important entity in your scene which you wanted to
                detail better than the others, such as a player model.
                @par
                There are three parameters to this method; the first is a factor to apply; it
                defaults to 1.0 (no change), by increasing this to say 2.0, this model would
                take twice as long to reduce in detail, whilst at 0.5 this entity would use lower
                detail versions twice as quickly. The other 2 parameters are hard limits which
                let you set the maximum and minimum level-of-detail version to use, after all
                other calculations have been made. This lets you say that this entity should
                never be simplified, or that it can only use LODs below a certain level even
                when right next to the camera.
                @param factor Proportional factor to apply to the distance at which LOD is changed.
                Higher values increase the distance at which higher LODs are displayed (2.0 is
                twice the normal distance, 0.5 is half).
                @param maxDetailIndex The index of the maximum LOD this entity is allowed to use (lower
                indexes are higher detail: index 0 is the original full detail model).
                @param minDetailIndex The index of the minimum LOD this entity is allowed to use (higher
                indexes are lower detail). Use something like 99 if you want unlimited LODs (the actual
                LOD will be limited by the number in the Mesh)
                */
                void setMeshLodBias(Real factor, ushort maxDetailIndex = 0, ushort minDetailIndex = 99);

                /** Sets a level-of-detail bias for the material detail of this entity.
                @remarks
                Level of detail reduction is normally applied automatically based on the Material
                settings. However, it is possible to influence this behaviour for this entity
                by adjusting the LOD bias. This 'nudges' the material level of detail used for this
                entity up or down depending on your requirements. You might want to use this
                if there was a particularly important entity in your scene which you wanted to
                detail better than the others, such as a player model.
                @par
                There are three parameters to this method; the first is a factor to apply; it
                defaults to 1.0 (no change), by increasing this to say 2.0, this entity would
                take twice as long to use a lower detail material, whilst at 0.5 this entity
                would use lower detail versions twice as quickly. The other 2 parameters are
                hard limits which let you set the maximum and minimum level-of-detail index
                to use, after all other calculations have been made. This lets you say that
                this entity should never be simplified, or that it can only use LODs below
                a certain level even when right next to the camera.
                @param factor Proportional factor to apply to the distance at which LOD is changed.
                Higher values increase the distance at which higher LODs are displayed (2.0 is
                twice the normal distance, 0.5 is half).
                @param maxDetailIndex The index of the maximum LOD this entity is allowed to use (lower
                indexes are higher detail: index 0 is the original full detail model).
                @param minDetailIndex The index of the minimum LOD this entity is allowed to use (higher
                indexes are lower detail. Use something like 99 if you want unlimited LODs (the actual
                LOD will be limited by the number of lod indexes used in the Material)
                */
                void setMaterialLodBias(Real factor, ushort maxDetailIndex = 0, ushort minDetailIndex = 99);

                /** Sets whether the polygon mode of this entire entity may be
                overridden by the camera detail settings.
                */
                void setPolygonModeOverrideable(bool PolygonModeOverrideable);
                /** Attaches another object to a certain bone of the skeleton which this entity uses.
                @remarks
                This method can be used to attach another object to an animated part of this entity,
                by attaching it to a bone in the skeleton (with an offset if required). As this entity
                is animated, the attached object will move relative to the bone to which it is attached.
                @par
                An exception is thrown if the movable object is already attached to the bone, another bone or scenenode.
                If the entity has no skeleton or the bone name cannot be found then an exception is thrown.
                @param boneName The name of the bone (in the skeleton) to attach this object
                @param pMovable Pointer to the object to attach
                @param offsetOrientation An adjustment to the orientation of the attached object, relative to the bone.
                @param offsetPosition An adjustment to the position of the attached object, relative to the bone.
                @returns The TagPoint to which the object has been attached
                */
                TagPoint* attachObjectToBone(const String &boneName,
                        MovableObject *pMovable,
                        const Quaternion &offsetOrientation = Quaternion::IDENTITY,
                        const Vector3 &offsetPosition = Vector3::ZERO);

                /** Detach a MovableObject previously attached using attachObjectToBone.
            If the movable object name is not found then an exception is raised.
        @param movableName is the name of the movable object to be detached.
                */
                MovableObject* detachObjectFromBone(const String &movableName);

                /** Detaches an object by pointer.
                @remarks
                Use this method to destroy a MovableObject which is attached to a bone of belonging this entity.
                But sometimes the object may be not in the child object list because it is a lod entity,
                this method can safely detect and ignore in this case and won't raise an exception.
                */
                void detachObjectFromBone(MovableObject* obj);

                /// Detach all MovableObjects previously attached using attachObjectToBone
                void detachAllObjectsFromBone(void);

                typedef MapIterator<ChildObjectList> ChildObjectListIterator;
                /** Gets an iterator to the list of objects attached to bones on this entity. */
                ChildObjectListIterator getAttachedObjectIterator(void);
                /** @see MovableObject::getBoundingRadius */
                Real getBoundingRadius(void) const;

                /** @copy MovableObject::getWorldBoundingBox */
                const AxisAlignedBox& getWorldBoundingBox(bool derive = false) const;
                /** @copy MovableObject::getWorldBoundingSphere */
                const Sphere& getWorldBoundingSphere(bool derive = false) const;

        /** If set to true, this forces normals of this entity to be normalised
            dynamically by the hardware.
        @remarks
            This option can be used to prevent lighting variations when scaling an
            Entity using a SceneNode - normally because this scaling is hardware
            based, the normals get scaled too which causes lighting to become inconsistent.
            However, this has an overhead so only do this if you really need to.
        */
        void setNormaliseNormals(bool normalise) { mNormaliseNormals = normalise; }

        /** Returns true if this entity has auto-normalisation of normals set. */
        bool getNormaliseNormals(void) const {return mNormaliseNormals; }


        /** Overridden member from ShadowCaster. */
        EdgeData* getEdgeList(void);
        /** Overridden member from ShadowCaster. */
        ShadowRenderableListIterator getShadowVolumeRenderableIterator(
            ShadowTechnique shadowTechnique, const Light* light,
            HardwareIndexBufferSharedPtr* indexBuffer,
            bool extrudeVertices, Real extrusionDistance, unsigned long flags = 0 );

                /** Internal method for retrieving bone matrix information. */
                const Matrix4* _getBoneMatrices(void) const { return mBoneMatrices;}
                /** Internal method for retrieving bone matrix information. */
                unsigned short _getNumBoneMatrices(void) const { return mNumBoneMatrices; }
                /** Returns whether or not this entity is skeletally animated. */
                bool hasSkeleton(void) const { return mSkeletonInstance != 0; }
                /** Get this Entity's personal skeleton instance. */
                SkeletonInstance* getSkeleton(void) const { return mSkeletonInstance; }
                /** Returns whether or not hardware animation is enabled.
                @remarks
                Because fixed-function indexed vertex blending is rarely supported
                by existing graphics cards, hardware animation can only be done if
                the vertex programs in the materials used to render an entity support
                it. Therefore, this method will only return true if all the materials
                assigned to this entity have vertex programs assigned, and all those
                vertex programs must support 'includes_morph_animation true' if using
        morph animation, 'includes_pose_animation true' if using pose animation
        and 'includes_skeletal_animation true' if using skeletal animation.
                */
                bool isHardwareAnimationEnabled(void) const { return mHardwareAnimation; }

                /** Overridden from MovableObject */
                void _notifyAttached(Node* parent, bool isTagPoint = false);
        /** Returns the number of requests that have been made for software animation
        @remarks
            If non-zero then software animation will be performed in updateAnimation
            regardless of the current setting of isHardwareAnimationEnabled or any
            internal optimise for eliminate software animation. Requests for software
            animation are made by calling the addSoftwareAnimationRequest() method.
        */
        int getSoftwareAnimationRequests(void) const { return mSoftwareAnimationRequests; }
        /** Returns the number of requests that have been made for software animation of normals
        @remarks
            If non-zero, and getSoftwareAnimationRequests() also returns non-zero,
            then software animation of normals will be performed in updateAnimation
            regardless of the current setting of isHardwareAnimationEnabled or any
            internal optimise for eliminate software animation. Currently it is not
            possible to force software animation of only normals. Consequently this
            value is always less than or equal to that returned by getSoftwareAnimationRequests().
            Requests for software animation of normals are made by calling the
            addSoftwareAnimationRequest() method with 'true' as the parameter.
        */
        int getSoftwareAnimationNormalsRequests(void) const { return mSoftwareAnimationNormalsRequests; }
        /** Add a request for software animation
        @remarks
            Tells the entity to perform animation calculations for skeletal/vertex
            animations in software, regardless of the current setting of
            isHardwareAnimationEnabled().  Software animation will be performed
            any time one or more requests have been made.  If 'normalsAlso' is
            'true', then the entity will also do software blending on normal
            vectors, in addition to positions. This advanced method useful for
            situations in which access to actual mesh vertices is required,
            such as accurate collision detection or certain advanced shading
            techniques. When software animation is no longer needed,
            the caller of this method should always remove the request by calling
            removeSoftwareAnimationRequest(), passing the same value for
            'normalsAlso'.
        */
        void addSoftwareAnimationRequest(bool normalsAlso);
        /** Removes a request for software animation
        @remarks
            Calling this decrements the entity's internal counter of the number
            of requests for software animation.  If the counter is already zero
            then calling this method throws an exception.  The 'normalsAlso'
            flag if set to 'true' will also decrement the internal counter of
            number of requests for software animation of normals.
        */
        void removeSoftwareAnimationRequest(bool normalsAlso);

                /** Shares the SkeletonInstance with the supplied entity.
                *   Note that in order for this to work, both entities must have the same
                *   Skeleton.
                */
                void shareSkeletonInstanceWith(Entity* entity);

                /** Returns whether or not this entity is either morph or pose animated.
                */
                bool hasVertexAnimation(void) const;


                /** Stops sharing the SkeletonInstance with other entities.
                */
                void stopSharingSkeletonInstance();


                /**
                * Returns whether this entity shares it's SkeltonInstance with other entity instances.
                */
                inline bool sharesSkeletonInstance() const { return mSharedSkeletonEntities != NULL; }

                /**
                * Returns a pointer to the set of entities which share a SkeletonInstance.
                * If this instance does not share it's SkeletonInstance with other instances NULL will be returned
                */
                inline const EntitySet* getSkeletonInstanceSharingSet() const { return mSharedSkeletonEntities; }

                /** Updates the internal animation state set to include the latest
                available animations from the attached skeleton.
                @remarks
                Use this method if you manually add animations to a skeleton, or have
                linked the skeleton to another for animation purposes since creating
                this entity.
                @note
                If you have called getAnimationState prior to calling this method,
                the pointers will still remain valid.
                */
                void refreshAvailableAnimationState(void);

                /** Advanced method to perform all the updates required for an animated entity.
                @remarks
                You don't normally need to call this, but it's here incase you wish
                to manually update the animation of an Entity at a specific point in
                time. Animation will not be updated more than once a frame no matter
                how many times you call this method.
                */
                void _updateAnimation(void);

        /** Tests if any animation applied to this entity.
        @remarks
            An entity is animated if any animation state is enabled, or any manual bone
            applied to the skeleton.
        */
        bool _isAnimated(void) const;

        /** Tests if skeleton was animated.
        */
        bool _isSkeletonAnimated(void) const;

                /** Advanced method to get the temporarily blended skeletal vertex information
                for entities which are software skinned.
        @remarks
            Internal engine will eliminate software animation if possible, this
            information is unreliable unless added request for software animation
            via addSoftwareAnimationRequest.
        @note
            The positions/normals of the returned vertex data is in object space.
                */
                VertexData* _getSkelAnimVertexData(void) const;
                /** Advanced method to get the temporarily blended software vertex animation information
        @remarks
            Internal engine will eliminate software animation if possible, this
            information is unreliable unless added request for software animation
            via addSoftwareAnimationRequest.
        @note
            The positions/normals of the returned vertex data is in object space.
                */
                VertexData* _getSoftwareVertexAnimVertexData(void) const;
                /** Advanced method to get the hardware morph vertex information
        @note
            The positions/normals of the returned vertex data is in object space.
                */
                VertexData* _getHardwareVertexAnimVertexData(void) const;
                /** Advanced method to get the temp buffer information for software
                skeletal animation.
                */
                TempBlendedBufferInfo* _getSkelAnimTempBufferInfo(void);
                /** Advanced method to get the temp buffer information for software
                morph animation.
                */
                TempBlendedBufferInfo* _getVertexAnimTempBufferInfo(void);
                /// Override to return specific type flag
                uint32 getTypeFlags(void) const;
                /// Retrieve the VertexData which should be used for GPU binding
                VertexData* getVertexDataForBinding(void);

                /// Identify which vertex data we should be sending to the renderer
                enum VertexDataBindChoice
                {
                        BIND_ORIGINAL,
                        BIND_SOFTWARE_SKELETAL,
                        BIND_SOFTWARE_MORPH,
                        BIND_HARDWARE_MORPH
                };
                /// Choose which vertex data to bind to the renderer
                VertexDataBindChoice chooseVertexDataForBinding(bool hasVertexAnim) const;

                /** Are buffers already marked as vertex animated? */
                bool _getBuffersMarkedForAnimation(void) const { return mVertexAnimationAppliedThisFrame; }
                /** Mark just this vertex data as animated.
                */
                void _markBuffersUsedForAnimation(void);


        };

        /** Factory object for creating Entity instances */
        class _OgreExport EntityFactory : public MovableObjectFactory
        {
        protected:
                MovableObject* createInstanceImpl( const String& name, const NameValuePairList* params);
        public:
                EntityFactory() {}
                ~EntityFactory() {}

                static String FACTORY_TYPE_NAME;

                const String& getType(void) const;
                void destroyInstance( MovableObject* obj);

        };

} // namespace

#endif