source: OGRE/trunk/ogrenew/depcomp @ 692

Revision 692, 13.0 KB checked in by mattausch, 19 years ago (diff)

adding ogre 1.2 and dependencies

Line 
1#! /bin/sh
2
3# depcomp - compile a program generating dependencies as side-effects
4# Copyright 1999, 2000 Free Software Foundation, Inc.
5
6# This program is free software; you can redistribute it and/or modify
7# it under the terms of the GNU General Public License as published by
8# the Free Software Foundation; either version 2, or (at your option)
9# any later version.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14# GNU General Public License for more details.
15
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
19# 02111-1307, USA.
20
21# As a special exception to the GNU General Public License, if you
22# distribute this file as part of a program that contains a
23# configuration script generated by Autoconf, you may include it under
24# the same distribution terms that you use for the rest of that program.
25
26# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
27
28if test -z "$depmode" || test -z "$source" || test -z "$object"; then
29  echo "depcomp: Variables source, object and depmode must be set" 1>&2
30  exit 1
31fi
32# `libtool' can also be set to `yes' or `no'.
33
34if test -z "$depfile"; then
35   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
36   dir=`echo "$object" | sed 's,/.*$,/,'`
37   if test "$dir" = "$object"; then
38      dir=
39   fi
40   # FIXME: should be _deps on DOS.
41   depfile="$dir.deps/$base"
42fi
43
44tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
45
46rm -f "$tmpdepfile"
47
48# Some modes work just like other modes, but use different flags.  We
49# parameterize here, but still list the modes in the big case below,
50# to make depend.m4 easier to write.  Note that we *cannot* use a case
51# here, because this file can only contain one case statement.
52if test "$depmode" = hp; then
53  # HP compiler uses -M and no extra arg.
54  gccflag=-M
55  depmode=gcc
56fi
57
58if test "$depmode" = dashXmstdout; then
59   # This is just like dashmstdout with a different argument.
60   dashmflag=-xM
61   depmode=dashmstdout
62fi
63
64case "$depmode" in
65gcc3)
66## gcc 3 implements dependency tracking that does exactly what
67## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
68## it if -MD -MP comes after the -MF stuff.  Hmm.
69  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
70  stat=$?
71  if test $stat -eq 0; then :
72  else
73    rm -f "$tmpdepfile"
74    exit $stat
75  fi
76  mv "$tmpdepfile" "$depfile"
77  ;;
78
79gcc)
80## There are various ways to get dependency output from gcc.  Here's
81## why we pick this rather obscure method:
82## - Don't want to use -MD because we'd like the dependencies to end
83##   up in a subdir.  Having to rename by hand is ugly.
84##   (We might end up doing this anyway to support other compilers.)
85## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
86##   -MM, not -M (despite what the docs say).
87## - Using -M directly means running the compiler twice (even worse
88##   than renaming).
89  if test -z "$gccflag"; then
90    gccflag=-MD,
91  fi
92  "$@" -Wp,"$gccflag$tmpdepfile"
93  stat=$?
94  if test $stat -eq 0; then :
95  else
96    rm -f "$tmpdepfile"
97    exit $stat
98  fi
99  rm -f "$depfile"
100  echo "$object : \\" > "$depfile"
101  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
102## The second -e expression handles DOS-style file names with drive letters.
103  sed -e 's/^[^:]*: / /' \
104      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
105## This next piece of magic avoids the `deleted header file' problem.
106## The problem is that when a header file which appears in a .P file
107## is deleted, the dependency causes make to die (because there is
108## typically no way to rebuild the header).  We avoid this by adding
109## dummy dependencies for each header file.  Too bad gcc doesn't do
110## this for us directly.
111  tr ' ' '
112' < "$tmpdepfile" |
113## Some versions of gcc put a space before the `:'.  On the theory
114## that the space means something, we add a space to the output as
115## well.
116## Some versions of the HPUX 10.20 sed can't process this invocation
117## correctly.  Breaking it into two sed invocations is a workaround.
118    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
119  rm -f "$tmpdepfile"
120  ;;
121
122hp)
123  # This case exists only to let depend.m4 do its work.  It works by
124  # looking at the text of this script.  This case will never be run,
125  # since it is checked for above.
126  exit 1
127  ;;
128
129sgi)
130  if test "$libtool" = yes; then
131    "$@" "-Wp,-MDupdate,$tmpdepfile"
132  else
133    "$@" -MDupdate "$tmpdepfile"
134  fi
135  stat=$?
136  if test $stat -eq 0; then :
137  else
138    rm -f "$tmpdepfile"
139    exit $stat
140  fi
141  rm -f "$depfile"
142
143  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
144    echo "$object : \\" > "$depfile"
145
146    # Clip off the initial element (the dependent).  Don't try to be
147    # clever and replace this with sed code, as IRIX sed won't handle
148    # lines with more than a fixed number of characters (4096 in
149    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
150    # the IRIX cc adds comments like `#:fec' to the end of the
151    # dependency line.
152    tr ' ' '
153' < "$tmpdepfile" \
154    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
155    tr '
156' ' ' >> $depfile
157    echo >> $depfile
158
159    # The second pass generates a dummy entry for each header file.
160    tr ' ' '
161' < "$tmpdepfile" \
162   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
163   >> $depfile
164  else
165    # The sourcefile does not contain any dependencies, so just
166    # store a dummy comment line, to avoid errors with the Makefile
167    # "include basename.Plo" scheme.
168    echo "#dummy" > "$depfile"
169  fi
170  rm -f "$tmpdepfile"
171  ;;
172
173aix)
174  # The C for AIX Compiler uses -M and outputs the dependencies
175  # in a .u file.  This file always lives in the current directory.
176  # Also, the AIX compiler puts `$object:' at the start of each line;
177  # $object doesn't have directory information.
178  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
179  tmpdepfile="$stripped.u"
180  outname="$stripped.o"
181  if test "$libtool" = yes; then
182    "$@" -Wc,-M
183  else
184    "$@" -M
185  fi
186
187  stat=$?
188  if test $stat -eq 0; then :
189  else
190    rm -f "$tmpdepfile"
191    exit $stat
192  fi
193
194  if test -f "$tmpdepfile"; then
195    # Each line is of the form `foo.o: dependent.h'.
196    # Do two passes, one to just change these to
197    # `$object: dependent.h' and one to simply `dependent.h:'.
198    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
199    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
200  else
201    # The sourcefile does not contain any dependencies, so just
202    # store a dummy comment line, to avoid errors with the Makefile
203    # "include basename.Plo" scheme.
204    echo "#dummy" > "$depfile"
205  fi
206  rm -f "$tmpdepfile"
207  ;;
208
209icc)
210  # Must come before tru64.
211
212  # Intel's C compiler understands `-MD -MF file'.  However
213  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
214  # will fill foo.d with something like
215  #    foo.o: sub/foo.c
216  #    foo.o: sub/foo.h
217  # which is wrong.  We want:
218  #    sub/foo.o: sub/foo.c
219  #    sub/foo.o: sub/foo.h
220  #    sub/foo.c:
221  #    sub/foo.h:
222
223  "$@" -MD -MF "$tmpdepfile"
224  stat=$?
225  if test $stat -eq 0; then :
226  else
227    rm -f "$tmpdepfile"
228    exit $stat
229  fi
230  rm -f "$depfile"
231  # Each line is of the form `foo.o: dependent.h'.
232  # Do two passes, one to just change these to
233  # `$object: dependent.h' and one to simply `dependent.h:'.
234  sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
235  sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
236  rm -f "$tmpdepfile"
237  ;;
238
239tru64)
240   # The Tru64 compiler uses -MD to generate dependencies as a side
241   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
242   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
243   # dependencies in `foo.d' instead, so we check for that too.
244   # Subdirectories are respected.
245   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
246   test "x$dir" = "x$object" && dir=
247   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
248
249   if test "$libtool" = yes; then
250      tmpdepfile1="$dir.libs/$base.lo.d"
251      tmpdepfile2="$dir.libs/$base.d"
252      "$@" -Wc,-MD
253   else
254      tmpdepfile1="$dir$base.o.d"
255      tmpdepfile2="$dir$base.d"
256      "$@" -MD
257   fi
258
259   stat=$?
260   if test $stat -eq 0; then :
261   else
262      rm -f "$tmpdepfile1" "$tmpdepfile2"
263      exit $stat
264   fi
265
266   if test -f "$tmpdepfile1"; then
267      tmpdepfile="$tmpdepfile1"
268   else
269      tmpdepfile="$tmpdepfile2"
270   fi
271   if test -f "$tmpdepfile"; then
272      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
273      # That's a space and a tab in the [].
274      sed -e 's,^.*\.[a-z]*:[   ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
275   else
276      echo "#dummy" > "$depfile"
277   fi
278   rm -f "$tmpdepfile"
279   ;;
280
281#nosideeffect)
282  # This comment above is used by automake to tell side-effect
283  # dependency tracking mechanisms from slower ones.
284
285dashmstdout)
286  # Important note: in order to support this mode, a compiler *must*
287  # always write the proprocessed file to stdout, regardless of -o.
288  "$@" || exit $?
289
290  # Remove the call to Libtool.
291  if test "$libtool" = yes; then
292    while test $1 != '--mode=compile'; do
293      shift
294    done
295    shift
296  fi
297
298  # Remove `-o $object'.
299  IFS=" "
300  for arg
301  do
302    case $arg in
303    -o)
304      shift
305      ;;
306    $object)
307      shift
308      ;;
309    *)
310      set fnord "$@" "$arg"
311      shift # fnord
312      shift # $arg
313      ;;
314    esac
315  done
316
317  test -z "$dashmflag" && dashmflag=-M
318  # Require at least two characters before searching for `:'
319  # in the target name.  This is to cope with DOS-style filenames:
320  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
321  "$@" $dashmflag |
322    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
323  rm -f "$depfile"
324  cat < "$tmpdepfile" > "$depfile"
325  tr ' ' '
326' < "$tmpdepfile" | \
327## Some versions of the HPUX 10.20 sed can't process this invocation
328## correctly.  Breaking it into two sed invocations is a workaround.
329    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
330  rm -f "$tmpdepfile"
331  ;;
332
333dashXmstdout)
334  # This case only exists to satisfy depend.m4.  It is never actually
335  # run, as this mode is specially recognized in the preamble.
336  exit 1
337  ;;
338
339makedepend)
340  "$@" || exit $?
341  # Remove any Libtool call
342  if test "$libtool" = yes; then
343    while test $1 != '--mode=compile'; do
344      shift
345    done
346    shift
347  fi
348  # X makedepend
349  shift
350  cleared=no
351  for arg in "$@"; do
352    case $cleared in
353    no)
354      set ""; shift
355      cleared=yes ;;
356    esac
357    case "$arg" in
358    -D*|-I*)
359      set fnord "$@" "$arg"; shift ;;
360    # Strip any option that makedepend may not understand.  Remove
361    # the object too, otherwise makedepend will parse it as a source file.
362    -*|$object)
363      ;;
364    *)
365      set fnord "$@" "$arg"; shift ;;
366    esac
367  done
368  obj_suffix="`echo $object | sed 's/^.*\././'`"
369  touch "$tmpdepfile"
370  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
371  rm -f "$depfile"
372  cat < "$tmpdepfile" > "$depfile"
373  sed '1,2d' "$tmpdepfile" | tr ' ' '
374' | \
375## Some versions of the HPUX 10.20 sed can't process this invocation
376## correctly.  Breaking it into two sed invocations is a workaround.
377    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
378  rm -f "$tmpdepfile" "$tmpdepfile".bak
379  ;;
380
381cpp)
382  # Important note: in order to support this mode, a compiler *must*
383  # always write the proprocessed file to stdout.
384  "$@" || exit $?
385
386  # Remove the call to Libtool.
387  if test "$libtool" = yes; then
388    while test $1 != '--mode=compile'; do
389      shift
390    done
391    shift
392  fi
393
394  # Remove `-o $object'.
395  IFS=" "
396  for arg
397  do
398    case $arg in
399    -o)
400      shift
401      ;;
402    $object)
403      shift
404      ;;
405    *)
406      set fnord "$@" "$arg"
407      shift # fnord
408      shift # $arg
409      ;;
410    esac
411  done
412
413  "$@" -E |
414    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
415    sed '$ s: \\$::' > "$tmpdepfile"
416  rm -f "$depfile"
417  echo "$object : \\" > "$depfile"
418  cat < "$tmpdepfile" >> "$depfile"
419  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
420  rm -f "$tmpdepfile"
421  ;;
422
423msvisualcpp)
424  # Important note: in order to support this mode, a compiler *must*
425  # always write the proprocessed file to stdout, regardless of -o,
426  # because we must use -o when running libtool.
427  "$@" || exit $?
428  IFS=" "
429  for arg
430  do
431    case "$arg" in
432    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
433        set fnord "$@"
434        shift
435        shift
436        ;;
437    *)
438        set fnord "$@" "$arg"
439        shift
440        shift
441        ;;
442    esac
443  done
444  "$@" -E |
445  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
446  rm -f "$depfile"
447  echo "$object : \\" > "$depfile"
448  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::    \1 \\:p' >> "$depfile"
449  echo "        " >> "$depfile"
450  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
451  rm -f "$tmpdepfile"
452  ;;
453
454none)
455  exec "$@"
456  ;;
457
458*)
459  echo "Unknown depmode $depmode" 1>&2
460  exit 1
461  ;;
462esac
463
464exit 0
Note: See TracBrowser for help on using the repository browser.