Index: OGRE/trunk/ogrenew/acinclude.m4
===================================================================
--- OGRE/trunk/ogrenew/acinclude.m4	(revision 657)
+++ 	(revision )
@@ -1,492 +1,0 @@
-# Configure paths for FreeType2
-# Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor
-
-dnl AC_CHECK_FT2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for FreeType2, and define FT2_CFLAGS and FT2_LIBS
-dnl
-AC_DEFUN([AC_CHECK_FT2],
-[dnl
-dnl Get the cflags and libraries from the freetype-config script
-dnl
-AC_ARG_WITH(ft-prefix,
-[  --with-ft-prefix=PREFIX
-                          Prefix where FreeType is installed (optional)],
-            ft_config_prefix="$withval", ft_config_prefix="")
-AC_ARG_WITH(ft-exec-prefix,
-[  --with-ft-exec-prefix=PREFIX
-                          Exec prefix where FreeType is installed (optional)],
-            ft_config_exec_prefix="$withval", ft_config_exec_prefix="")
-AC_ARG_ENABLE(freetypetest,
-[  --disable-freetypetest  Do not try to compile and run
-                          a test FreeType program],
-              [], enable_fttest=yes)
-
-if test x$ft_config_exec_prefix != x ; then
-  ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix"
-  if test x${FT2_CONFIG+set} != xset ; then
-    FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config
-  fi
-fi
-if test x$ft_config_prefix != x ; then
-  ft_config_args="$ft_config_args --prefix=$ft_config_prefix"
-  if test x${FT2_CONFIG+set} != xset ; then
-    FT2_CONFIG=$ft_config_prefix/bin/freetype-config
-  fi
-fi
-AC_PATH_PROG(FT2_CONFIG, freetype-config, no)
-
-min_ft_version=ifelse([$1], ,9.1.0,$1)
-AC_MSG_CHECKING(for FreeType - version >= $min_ft_version)
-no_ft=""
-if test "$FT2_CONFIG" = "no" ; then
-  no_ft=yes
-else
-  FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags`
-  FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs`
-  ft_config_major_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-  ft_config_minor_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-  ft_config_micro_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-  ft_min_major_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-  ft_min_minor_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-  ft_min_micro_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-  if test x$enable_fttest = xyes ; then
-    ft_config_is_lt=""
-    if test $ft_config_major_version -lt $ft_min_major_version ; then
-      ft_config_is_lt=yes
-    else
-      if test $ft_config_major_version -eq $ft_min_major_version ; then
-        if test $ft_config_minor_version -lt $ft_min_minor_version ; then
-          ft_config_is_lt=yes
-        else
-          if test $ft_config_minor_version -eq $ft_min_minor_version ; then
-            if test $ft_config_micro_version -lt $ft_min_micro_version ; then
-              ft_config_is_lt=yes
-            fi
-          fi
-        fi
-      fi
-    fi
-    if test x$ft_config_is_lt = xyes ; then
-      no_ft=yes
-    else
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $FT2_CFLAGS"
-      LIBS="$FT2_LIBS $LIBS"
-dnl
-dnl Sanity checks for the results of freetype-config to some extent
-dnl
-      AC_TRY_RUN([
-#include <ft2build.h>
-#include FT_FREETYPE_H
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main()
-{
-  FT_Library library;
-  FT_Error error;
-
-  error = FT_Init_FreeType(&library);
-
-  if (error)
-    return 1;
-  else
-  {
-    FT_Done_FreeType(library);
-    return 0;
-  }
-}
-],, no_ft=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-      CFLAGS="$ac_save_CFLAGS"
-      LIBS="$ac_save_LIBS"
-    fi             # test $ft_config_version -lt $ft_min_version
-  fi               # test x$enable_fttest = xyes
-fi                 # test "$FT2_CONFIG" = "no"
-if test x$no_ft = x ; then
-   AC_MSG_RESULT(yes)
-   ifelse([$2], , :, [$2])
-else
-   AC_MSG_RESULT(no)
-   if test "$FT2_CONFIG" = "no" ; then
-     echo "*** The freetype-config script installed by FreeType 2 could not be found."
-     echo "*** If FreeType 2 was installed in PREFIX, make sure PREFIX/bin is in"
-     echo "*** your path, or set the FT2_CONFIG environment variable to the"
-     echo "*** full path to freetype-config."
-   else
-     if test x$ft_config_is_lt = xyes ; then
-       echo "*** Your installed version of the FreeType 2 library is too old."
-       echo "*** If you have different versions of FreeType 2, make sure that"
-       echo "*** correct values for --with-ft-prefix or --with-ft-exec-prefix"
-       echo "*** are used, or set the FT2_CONFIG environment variable to the"
-       echo "*** full path to freetype-config."
-     else
-       echo "*** The FreeType test program failed to run.  If your system uses"
-       echo "*** shared libraries and they are installed outside the normal"
-       echo "*** system library path, make sure the variable LD_LIBRARY_PATH"
-       echo "*** (or whatever is appropiate for your system) is correctly set."
-     fi
-   fi
-   FT2_CFLAGS=""
-   FT2_LIBS=""
-   ifelse([$3], , :, [$3])
-fi
-AC_SUBST(FT2_CFLAGS)
-AC_SUBST(FT2_LIBS)
-])
-
-AC_DEFUN([OGRE_USE_STLPORT],
-[AC_ARG_WITH(stlport, 
-             AC_HELP_STRING([--with-stlport=PATH],
-                           [the path to STLPort.]),
-             ac_cv_use_stlport=$withval,
-             ac_cv_use_stlport=no)
- AC_CACHE_CHECK([whether to use STLPort], ac_cv_use_stlport,
-                ac_cv_use_stlport=no)
- if test x$ac_cv_use_stlport != xno; then
-     STLPORT_CFLAGS="-I$ac_cv_use_stlport/stlport"
-     STLPORT_LIBS="-L$ac_cv_use_stlport/lib -lstlport"
- fi
- AC_SUBST(STLPORT_CFLAGS)
- AC_SUBST(STLPORT_LIBS)
-])
-
-AC_DEFUN([OGRE_GET_CONFIG_TOOLKIT],
-[OGRE_CFGTK=cli
- AC_ARG_WITH(cfgtk, 
-             AC_HELP_STRING([--with-cfgtk=TOOLKIT],
-                            [the toolkit for the config gui, currently cli or gtk]),
-             OGRE_CFGTK=$withval,
-             OGRE_CFGTK=cli)
-
- 
-  CFGTK_DEPS_CFLAGS=""
-  CFGTK_DEPS_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_CFGTK in 
-    gtk)
-      PKG_CHECK_MODULES(CFGTK_DEPS, gtkmm-2.0 libglademm-2.0);;
-  esac
-
-  AC_SUBST(CFGTK_DEPS_CFLAGS)
-  AC_SUBST(CFGTK_DEPS_LIBS)
-  AC_SUBST(OGRE_CFGTK)
-])
-
-AC_DEFUN([OGRE_GET_PLATFORM],
-[OGRE_PLATFORM=SDL
- AC_ARG_WITH(platform, 
-             AC_HELP_STRING([--with-platform=PLATFORM],
-                            [the platform to build, currently SDL, GLX, Win32 or gtk]),
-             OGRE_PLATFORM=$withval,
-             OGRE_PLATFORM=SDL)
-
- 
-  if test ! -d ${srcdir}/PlatformManagers/$OGRE_PLATFORM; then
-    OGRE_PLATFORM=SDL
-  fi
-
-  PLATFORM_CFLAGS=""
-  PLATFORM_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_PLATFORM in 
-    SDL)
-      AM_PATH_SDL(1.2.6,,[AC_MSG_ERROR("--with-platform: SDL > 1.2.6 not found")])
-      PLATFORM_CFLAGS=$SDL_CFLAGS
-      PLATFORM_LIBS=$SDL_LIBS
-      ;;
-    gtk)
-      PKG_CHECK_MODULES(PLATFORM, gtkglextmm-1.0 libglademm-2.0);;
-    GLX)
-      AC_CHECK_HEADERS([X11/Intrinsic.h],, [AC_MSG_ERROR("libxt headers not found")])
-      AC_CHECK_HEADERS([X11/Xaw/Command.h],, [AC_MSG_ERROR("libxaw headers not found")])
-      AC_CHECK_HEADERS([X11/extensions/Xrandr.h],, [AC_MSG_ERROR("libxrandr headers not found")],[#include <X11/Xlib.h>])
-      PLATFORM_CFLAGS="-I/usr/X11R6/include"
-      PLATFORM_LIBS="-L/usr/X11R6/lib -lX11 -lXaw"
-    ;;
-    Win32)
-      PLATFORM_CFLAGS=""
-      PLATFORM_LIBS="-lgdi32 -lwinmm -ldinput8 -ldxguid"
-    ;;
-  esac
-
-  AC_SUBST(PLATFORM_CFLAGS)
-  AC_SUBST(PLATFORM_LIBS)
-  AC_SUBST(OGRE_PLATFORM)
-])
-
-AC_DEFUN([OGRE_GET_GLSUPPORT],
-[OGRE_GLSUPPORT=none
- AC_ARG_WITH(gl-support, 
-             AC_HELP_STRING([--with-gl-support=PLATFORM],
-                            [ The GLsupport to build (SDL, GLX, Win32 or gtk). Defaults to the platform. Only set this if you know what you are doing. Use --with-platform otherwise.]),
-             OGRE_GLSUPPORT=$withval,
-             OGRE_GLSUPPORT=none)
-
-  if test "$OGRE_GLSUPPORT" = "none" ; then
-    OGRE_GLSUPPORT="$OGRE_PLATFORM"
-    AC_MSG_NOTICE([setting gl-support to platform: $OGRE_GLSUPPORT])
-  fi
-  if test "$OGRE_GLSUPPORT" = "Win32" ; then
-    # Uppercase/lowercase
-    OGRE_GLSUPPORT=win32
-  fi
-  if test ! -d ${srcdir}/RenderSystems/GL/src/$OGRE_GLSUPPORT; then
-    OGRE_GLSUPPORT=SDL
-  fi
-
-  GLSUPPORT_CFLAGS=""
-  GLSUPPORT_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_GLSUPPORT in 
-    SDL) AM_PATH_SDL(1.2.6,,[AC_MSG_ERROR("--with-gl-support: SDL > 1.2.6 not found")])
-      GLSUPPORT_CFLAGS=$SDL_CFLAGS
-      GLSUPPORT_LIBS=$SDL_LIBS;;
-    gtk) 
-    	PKG_CHECK_MODULES(GLSUPPORT, gtkglextmm-1.0)
-    	GLSUPPORT_LIBS="$GLSUPPORT_LIBS"
-    ;;
-    GLX)
-	GLSUPPORT_CFLAGS="-I/usr/X11R6/include"
-	GLSUPPORT_LIBS="-L/usr/X11R6/lib -lX11 -lXext -lGL -lXrandr"
-    ;;
-    win32)
-	GLSUPPORT_CFLAGS=""
-	GLSUPPORT_LIBS="-lgdi32 -lwinmm"
-    ;;
-  esac
-
-  AC_SUBST(GLSUPPORT_CFLAGS)
-  AC_SUBST(GLSUPPORT_LIBS)
-  AC_SUBST(OGRE_GLSUPPORT)
-  AC_CONFIG_FILES([RenderSystems/GL/src/gtk/Makefile
-                   RenderSystems/GL/src/SDL/Makefile
-		   RenderSystems/GL/src/GLX/Makefile
-		   RenderSystems/GL/src/win32/Makefile])
-])
-
-AC_DEFUN([OGRE_SETUP_FOR_TARGET],
-[case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-	AC_SUBST(SHARED_FLAGS, "-shared -no-undefined -Xlinker --export-all-symbols")
-	AC_SUBST(PLUGIN_FLAGS, "-shared -no-undefined -avoid-version")
-	AC_SUBST(GL_LIBS, "-lopengl32 -lglu32")	
-	AC_CHECK_TOOL(RC, windres)
-        nt=true
-;;
-*-*-darwin*)
-        AC_SUBST(SHARED_FLAGS, "-shared")
-        AC_SUBST(PLUGIN_FLAGS, "-shared -avoid-version")
-        AC_SUBST(GL_LIBS, "-lGL -lGLU")
-        osx=true
-;;
- *) dnl default to standard linux
-	AC_SUBST(SHARED_FLAGS, "-shared")
-	AC_SUBST(PLUGIN_FLAGS, "-shared -avoid-version")
-	AC_SUBST(GL_LIBS, "-lGL -lGLU")
-        linux=true
-;;
-esac
-dnl you must arrange for every AM_conditional to run every time configure runs
-AM_CONDITIONAL(OGRE_NT, test x$nt = xtrue)
-AM_CONDITIONAL(OGRE_LINUX, test x$linux = xtrue)
-AM_CONDITIONAL(OGRE_OSX,test x$osx = xtrue )
-])
-
-
-AC_DEFUN([OGRE_DETECT_ENDIAN],
-[AC_TRY_RUN([
-		int main()
-		{
-			short s = 1;
-			short* ptr = &s;
-			unsigned char c = *((char*)ptr);
-			return c;
-		}
-	]
-	,[AC_DEFINE(CONFIG_BIG_ENDIAN,,[Big endian machine])]
-	,[AC_DEFINE(CONFIG_LITTLE_ENDIAN,,[Little endian machine])])
-])
-
-AC_DEFUN([OGRE_CHECK_OPENEXR],
-[AC_ARG_ENABLE(openexr,
-              AC_HELP_STRING([--enable-openexr],
-                             [Build the OpenEXR plugin]),
-              [build_exr=$enableval],
-              [build_exr=no])
-
-if test "x$build_exr" = "xyes" ; then
-	PKG_CHECK_MODULES(OPENEXR, OpenEXR, [build_exr=yes], [build_exr=no])
-
-	if test "x$build_exr" = "xyes" ; then
-	   	AC_CONFIG_FILES([ PlugIns/EXRCodec/Makefile \
-    					 PlugIns/EXRCodec/src/Makefile \
-    					 PlugIns/EXRCodec/include/Makefile])
-		AC_SUBST(OPENEXR_CFLAGS)
-		AC_SUBST(OPENEXR_LIBS)
-
-	fi
-
-fi
-
-AM_CONDITIONAL(BUILD_EXRPLUGIN, test x$build_exr = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_CG],
-[AC_ARG_ENABLE(cg,
-              AC_HELP_STRING([--disable-cg],
-                             [Do not build the Cg plugin (recommended you do so!)]),
-              [build_cg=$enableval],
-              [build_cg=yes])
-
-if test "x$build_cg" = "xyes" ; then
-	AC_CHECK_LIB(Cg, cgCreateProgram,,AC_MSG_ERROR([
-	****************************************************************
-	* You do not have the nVidia Cg libraries installed.           *
-	* Go to http://developer.nvidia.com/object/cg_toolkit.html     *
-	* (Click on Cg_Linux.tar.gz).                                  *
-	* You can disable the building of Cg support by providing      *	
-	* --disable-cg to this configure script but this is highly     *
-	* discouraged as this breaks many of the examples.             *
-	****************************************************************])
-	)
-fi
-
-AM_CONDITIONAL(BUILD_CGPLUGIN, test x$build_cg = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_CPPUNIT],
-[
-AM_PATH_CPPUNIT([1.9.0], [build_unit_tests=true])
-AM_CONDITIONAL([BUILD_UNIT_TESTS], [test x$build_unit_tests = xtrue])
-])
-
-
-AC_DEFUN([OGRE_CHECK_DX9],
-[AC_ARG_ENABLE(direct3d,
-              AC_HELP_STRING([--enable-direct3d],
-                             [Build the DirectX 9 Render System]),
-              [build_dx9=$enableval],
-              [build_dx9=no])
-
-AM_CONDITIONAL(BUILD_DX9RENDERSYSTEM, test x$build_dx9 = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_DEVIL],
-[AC_ARG_ENABLE(devil,
-              AC_HELP_STRING([--disable-devil],
-                             [Don't use DevIL for image loading. This is not recommended unless you provide your own image loading codecs.]),
-              [build_il=$enableval],
-              [build_il=yes])
-
-AM_CONDITIONAL(USE_DEVIL, test x$build_il = xyes)
-
-if test "x$build_il" = "xyes" ; then
-	AC_CHECK_LIB(IL, ilInit,,AC_MSG_ERROR([
-****************************************************************
-* You do not have DevIL installed.  This is required to build. *
-* You may find it at http://openil.sourceforge.net/.           *
-* Note: You can also provide --disable-devil to the build      *
-* process to build without DevIL. This is an advanced option   *
-* useful only if you provide your own image loading codecs.    *
-****************************************************************]))
-	AC_CHECK_LIB(ILU, iluFlipImage)
-	AC_DEFINE([OGRE_NO_DEVIL], [0], [Build devil])
-else
-	AC_DEFINE([OGRE_NO_DEVIL], [1], [Build devil])
-fi
-
-
-])
-
-
-AC_DEFUN([OGRE_CHECK_PIC],
-[
-AC_MSG_CHECKING([whether -fPIC is needed])
-    case $host in
-        x86_64-*)
-            CXXFLAGS="$CXXFLAGS -fPIC"
-            AC_MSG_RESULT(yes)
-        ;;
-        *)
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-])
-
-AC_DEFUN([OGRE_CHECK_CEGUI], [
-    PKG_CHECK_MODULES(CEGUI, CEGUI >= 0.3.0, 
-            [build_cegui_sample=true], [build_cegui_sample=false])
-    if test x$build_cegui_sample = xtrue; then
-        AC_CONFIG_FILES([Samples/Common/CEGUIRenderer/Makefile \
-                         Samples/Common/CEGUIRenderer/CEGUI-OGRE.pc
-                         Samples/Common/CEGUIRenderer/src/Makefile \
-                         Samples/Common/CEGUIRenderer/include/Makefile \
-                         Samples/Gui/Makefile \
-                         Samples/Gui/src/Makefile])
-        AC_SUBST(CEGUI_CFLAGS)
-        AC_SUBST(CEGUI_LIBS)
-        AC_MSG_RESULT([CEGUI available, Gui sample will be built])
-    else
-        AC_MSG_RESULT([CEGUI not available, Gui sample will not be built])
-    fi
-    AM_CONDITIONAL([BUILD_CEGUI_SAMPLE], [test x$build_cegui_sample = xtrue])
-])
-
-AC_DEFUN([OGRE_CHECK_DOUBLE],
-[
-AC_ARG_ENABLE(double,
-              AC_HELP_STRING([--enable-double],
-                             [Build OGRE in double floating point precision mode. This is not recommended for normal use as it is slower.]),
-              [build_double=$enableval],
-              [build_double=no])
-AC_MSG_CHECKING([whether to use double floating point precision])
-	case $build_double in
-        yes)
-			AC_DEFINE([OGRE_DOUBLE_PRECISION], [1], [Build with double precision])
-			AC_MSG_RESULT(yes)
-        ;;
-        *)
-			AC_DEFINE([OGRE_DOUBLE_PRECISION], [0], [Build with double precision])
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-])
-
-AC_DEFUN([OGRE_CHECK_THREADING],
-[
-AC_ARG_ENABLE(threading,
-              AC_HELP_STRING([--enable-threading],
-                             [Indicate general support for multithreading. This will enable threading support in certain parts of the engine, mainly resource loading and SharedPtr handling. WARNING: highly experimental, use with caution.]),
-              [build_threads=$enableval],
-              [build_threads=no])
-AC_MSG_CHECKING([whether to use threaded resource loading])
-	case $build_threads in
-        yes)
-            CXXFLAGS="$CXXFLAGS -pthread"
-            OGRE_THREAD_LIBS="-lboost_thread-mt"
-			AC_DEFINE([OGRE_THREAD_SUPPORT], [1], [Build with thread support])
-            AC_CHECK_LIB([boost_thread-mt], [main],, AC_MSG_ERROR([cannot find boost_thread-mt library]))
-            AC_MSG_RESULT(yes)
-        ;;
-        *)
-            OGRE_THREAD_LIBS=""
-			AC_DEFINE([OGRE_THREAD_SUPPORT], [0], [Build with thread support])
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-    AC_SUBST(OGRE_THREAD_LIBS)
-])
Index: OGRE/trunk/ogrenew/aclocal.m4
===================================================================
--- OGRE/trunk/ogrenew/aclocal.m4	(revision 657)
+++ 	(revision )
@@ -1,5363 +1,0 @@
-# generated automatically by aclocal 1.7.5 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Configure paths for FreeType2
-# Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor
-
-dnl AC_CHECK_FT2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for FreeType2, and define FT2_CFLAGS and FT2_LIBS
-dnl
-AC_DEFUN([AC_CHECK_FT2],
-[dnl
-dnl Get the cflags and libraries from the freetype-config script
-dnl
-AC_ARG_WITH(ft-prefix,
-[  --with-ft-prefix=PREFIX
-                          Prefix where FreeType is installed (optional)],
-            ft_config_prefix="$withval", ft_config_prefix="")
-AC_ARG_WITH(ft-exec-prefix,
-[  --with-ft-exec-prefix=PREFIX
-                          Exec prefix where FreeType is installed (optional)],
-            ft_config_exec_prefix="$withval", ft_config_exec_prefix="")
-AC_ARG_ENABLE(freetypetest,
-[  --disable-freetypetest  Do not try to compile and run
-                          a test FreeType program],
-              [], enable_fttest=yes)
-
-if test x$ft_config_exec_prefix != x ; then
-  ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix"
-  if test x${FT2_CONFIG+set} != xset ; then
-    FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config
-  fi
-fi
-if test x$ft_config_prefix != x ; then
-  ft_config_args="$ft_config_args --prefix=$ft_config_prefix"
-  if test x${FT2_CONFIG+set} != xset ; then
-    FT2_CONFIG=$ft_config_prefix/bin/freetype-config
-  fi
-fi
-AC_PATH_PROG(FT2_CONFIG, freetype-config, no)
-
-min_ft_version=ifelse([$1], ,9.1.0,$1)
-AC_MSG_CHECKING(for FreeType - version >= $min_ft_version)
-no_ft=""
-if test "$FT2_CONFIG" = "no" ; then
-  no_ft=yes
-else
-  FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags`
-  FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs`
-  ft_config_major_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-  ft_config_minor_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-  ft_config_micro_version=`$FT2_CONFIG $ft_config_args --version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-  ft_min_major_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-  ft_min_minor_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-  ft_min_micro_version=`echo $min_ft_version | \
-         sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-  if test x$enable_fttest = xyes ; then
-    ft_config_is_lt=""
-    if test $ft_config_major_version -lt $ft_min_major_version ; then
-      ft_config_is_lt=yes
-    else
-      if test $ft_config_major_version -eq $ft_min_major_version ; then
-        if test $ft_config_minor_version -lt $ft_min_minor_version ; then
-          ft_config_is_lt=yes
-        else
-          if test $ft_config_minor_version -eq $ft_min_minor_version ; then
-            if test $ft_config_micro_version -lt $ft_min_micro_version ; then
-              ft_config_is_lt=yes
-            fi
-          fi
-        fi
-      fi
-    fi
-    if test x$ft_config_is_lt = xyes ; then
-      no_ft=yes
-    else
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $FT2_CFLAGS"
-      LIBS="$FT2_LIBS $LIBS"
-dnl
-dnl Sanity checks for the results of freetype-config to some extent
-dnl
-      AC_TRY_RUN([
-#include <ft2build.h>
-#include FT_FREETYPE_H
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main()
-{
-  FT_Library library;
-  FT_Error error;
-
-  error = FT_Init_FreeType(&library);
-
-  if (error)
-    return 1;
-  else
-  {
-    FT_Done_FreeType(library);
-    return 0;
-  }
-}
-],, no_ft=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-      CFLAGS="$ac_save_CFLAGS"
-      LIBS="$ac_save_LIBS"
-    fi             # test $ft_config_version -lt $ft_min_version
-  fi               # test x$enable_fttest = xyes
-fi                 # test "$FT2_CONFIG" = "no"
-if test x$no_ft = x ; then
-   AC_MSG_RESULT(yes)
-   ifelse([$2], , :, [$2])
-else
-   AC_MSG_RESULT(no)
-   if test "$FT2_CONFIG" = "no" ; then
-     echo "*** The freetype-config script installed by FreeType 2 could not be found."
-     echo "*** If FreeType 2 was installed in PREFIX, make sure PREFIX/bin is in"
-     echo "*** your path, or set the FT2_CONFIG environment variable to the"
-     echo "*** full path to freetype-config."
-   else
-     if test x$ft_config_is_lt = xyes ; then
-       echo "*** Your installed version of the FreeType 2 library is too old."
-       echo "*** If you have different versions of FreeType 2, make sure that"
-       echo "*** correct values for --with-ft-prefix or --with-ft-exec-prefix"
-       echo "*** are used, or set the FT2_CONFIG environment variable to the"
-       echo "*** full path to freetype-config."
-     else
-       echo "*** The FreeType test program failed to run.  If your system uses"
-       echo "*** shared libraries and they are installed outside the normal"
-       echo "*** system library path, make sure the variable LD_LIBRARY_PATH"
-       echo "*** (or whatever is appropiate for your system) is correctly set."
-     fi
-   fi
-   FT2_CFLAGS=""
-   FT2_LIBS=""
-   ifelse([$3], , :, [$3])
-fi
-AC_SUBST(FT2_CFLAGS)
-AC_SUBST(FT2_LIBS)
-])
-
-AC_DEFUN([OGRE_USE_STLPORT],
-[AC_ARG_WITH(stlport, 
-             AC_HELP_STRING([--with-stlport=PATH],
-                           [the path to STLPort.]),
-             ac_cv_use_stlport=$withval,
-             ac_cv_use_stlport=no)
- AC_CACHE_CHECK([whether to use STLPort], ac_cv_use_stlport,
-                ac_cv_use_stlport=no)
- if test x$ac_cv_use_stlport != xno; then
-     STLPORT_CFLAGS="-I$ac_cv_use_stlport/stlport"
-     STLPORT_LIBS="-L$ac_cv_use_stlport/lib -lstlport"
- fi
- AC_SUBST(STLPORT_CFLAGS)
- AC_SUBST(STLPORT_LIBS)
-])
-
-AC_DEFUN([OGRE_GET_CONFIG_TOOLKIT],
-[OGRE_CFGTK=cli
- AC_ARG_WITH(cfgtk, 
-             AC_HELP_STRING([--with-cfgtk=TOOLKIT],
-                            [the toolkit for the config gui, currently cli or gtk]),
-             OGRE_CFGTK=$withval,
-             OGRE_CFGTK=cli)
-
- 
-  CFGTK_DEPS_CFLAGS=""
-  CFGTK_DEPS_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_CFGTK in 
-    gtk)
-      PKG_CHECK_MODULES(CFGTK_DEPS, gtkmm-2.0 libglademm-2.0);;
-  esac
-
-  AC_SUBST(CFGTK_DEPS_CFLAGS)
-  AC_SUBST(CFGTK_DEPS_LIBS)
-  AC_SUBST(OGRE_CFGTK)
-])
-
-AC_DEFUN([OGRE_GET_PLATFORM],
-[OGRE_PLATFORM=SDL
- AC_ARG_WITH(platform, 
-             AC_HELP_STRING([--with-platform=PLATFORM],
-                            [the platform to build, currently SDL, GLX, Win32 or gtk]),
-             OGRE_PLATFORM=$withval,
-             OGRE_PLATFORM=SDL)
-
- 
-  if test ! -d ${srcdir}/PlatformManagers/$OGRE_PLATFORM; then
-    OGRE_PLATFORM=SDL
-  fi
-
-  PLATFORM_CFLAGS=""
-  PLATFORM_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_PLATFORM in 
-    SDL)
-      AM_PATH_SDL(1.2.6,,[AC_MSG_ERROR("--with-platform: SDL > 1.2.6 not found")])
-      PLATFORM_CFLAGS=$SDL_CFLAGS
-      PLATFORM_LIBS=$SDL_LIBS
-      ;;
-    gtk)
-      PKG_CHECK_MODULES(PLATFORM, gtkglextmm-1.0 libglademm-2.0);;
-    GLX)
-      AC_CHECK_HEADERS([X11/Intrinsic.h],, [AC_MSG_ERROR("libxt headers not found")])
-      AC_CHECK_HEADERS([X11/Xaw/Command.h],, [AC_MSG_ERROR("libxaw headers not found")])
-      AC_CHECK_HEADERS([X11/extensions/Xrandr.h],, [AC_MSG_ERROR("libxrandr headers not found")],[#include <X11/Xlib.h>])
-      PLATFORM_CFLAGS="-I/usr/X11R6/include"
-      PLATFORM_LIBS="-L/usr/X11R6/lib -lX11 -lXaw"
-    ;;
-    Win32)
-      PLATFORM_CFLAGS=""
-      PLATFORM_LIBS="-lgdi32 -lwinmm -ldinput8 -ldxguid"
-    ;;
-  esac
-
-  AC_SUBST(PLATFORM_CFLAGS)
-  AC_SUBST(PLATFORM_LIBS)
-  AC_SUBST(OGRE_PLATFORM)
-])
-
-AC_DEFUN([OGRE_GET_GLSUPPORT],
-[OGRE_GLSUPPORT=none
- AC_ARG_WITH(gl-support, 
-             AC_HELP_STRING([--with-gl-support=PLATFORM],
-                            [ The GLsupport to build (SDL, GLX, Win32 or gtk). Defaults to the platform. Only set this if you know what you are doing. Use --with-platform otherwise.]),
-             OGRE_GLSUPPORT=$withval,
-             OGRE_GLSUPPORT=none)
-
-  if test "$OGRE_GLSUPPORT" = "none" ; then
-    OGRE_GLSUPPORT="$OGRE_PLATFORM"
-    AC_MSG_NOTICE([setting gl-support to platform: $OGRE_GLSUPPORT])
-  fi
-  if test "$OGRE_GLSUPPORT" = "Win32" ; then
-    # Uppercase/lowercase
-    OGRE_GLSUPPORT=win32
-  fi
-  if test ! -d ${srcdir}/RenderSystems/GL/src/$OGRE_GLSUPPORT; then
-    OGRE_GLSUPPORT=SDL
-  fi
-
-  GLSUPPORT_CFLAGS=""
-  GLSUPPORT_LIBS=""
-
-  dnl Do the extra checks per type here
-  case $OGRE_GLSUPPORT in 
-    SDL) AM_PATH_SDL(1.2.6,,[AC_MSG_ERROR("--with-gl-support: SDL > 1.2.6 not found")])
-      GLSUPPORT_CFLAGS=$SDL_CFLAGS
-      GLSUPPORT_LIBS=$SDL_LIBS;;
-    gtk) 
-    	PKG_CHECK_MODULES(GLSUPPORT, gtkglextmm-1.0)
-    	GLSUPPORT_LIBS="$GLSUPPORT_LIBS"
-    ;;
-    GLX)
-	GLSUPPORT_CFLAGS="-I/usr/X11R6/include"
-	GLSUPPORT_LIBS="-L/usr/X11R6/lib -lX11 -lXext -lGL -lXrandr"
-    ;;
-    win32)
-	GLSUPPORT_CFLAGS=""
-	GLSUPPORT_LIBS="-lgdi32 -lwinmm"
-    ;;
-  esac
-
-  AC_SUBST(GLSUPPORT_CFLAGS)
-  AC_SUBST(GLSUPPORT_LIBS)
-  AC_SUBST(OGRE_GLSUPPORT)
-  AC_CONFIG_FILES([RenderSystems/GL/src/gtk/Makefile
-                   RenderSystems/GL/src/SDL/Makefile
-		   RenderSystems/GL/src/GLX/Makefile
-		   RenderSystems/GL/src/win32/Makefile])
-])
-
-AC_DEFUN([OGRE_SETUP_FOR_TARGET],
-[case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-	AC_SUBST(SHARED_FLAGS, "-shared -no-undefined -Xlinker --export-all-symbols")
-	AC_SUBST(PLUGIN_FLAGS, "-shared -no-undefined -avoid-version")
-	AC_SUBST(GL_LIBS, "-lopengl32 -lglu32")	
-	AC_CHECK_TOOL(RC, windres)
-        nt=true
-;;
-*-*-darwin*)
-        AC_SUBST(SHARED_FLAGS, "-shared")
-        AC_SUBST(PLUGIN_FLAGS, "-shared -avoid-version")
-        AC_SUBST(GL_LIBS, "-lGL -lGLU")
-        osx=true
-;;
- *) dnl default to standard linux
-	AC_SUBST(SHARED_FLAGS, "-shared")
-	AC_SUBST(PLUGIN_FLAGS, "-shared -avoid-version")
-	AC_SUBST(GL_LIBS, "-lGL -lGLU")
-        linux=true
-;;
-esac
-dnl you must arrange for every AM_conditional to run every time configure runs
-AM_CONDITIONAL(OGRE_NT, test x$nt = xtrue)
-AM_CONDITIONAL(OGRE_LINUX, test x$linux = xtrue)
-AM_CONDITIONAL(OGRE_OSX,test x$osx = xtrue )
-])
-
-
-AC_DEFUN([OGRE_DETECT_ENDIAN],
-[AC_TRY_RUN([
-		int main()
-		{
-			short s = 1;
-			short* ptr = &s;
-			unsigned char c = *((char*)ptr);
-			return c;
-		}
-	]
-	,[AC_DEFINE(CONFIG_BIG_ENDIAN,,[Big endian machine])]
-	,[AC_DEFINE(CONFIG_LITTLE_ENDIAN,,[Little endian machine])])
-])
-
-AC_DEFUN([OGRE_CHECK_OPENEXR],
-[AC_ARG_ENABLE(openexr,
-              AC_HELP_STRING([--enable-openexr],
-                             [Build the OpenEXR plugin]),
-              [build_exr=$enableval],
-              [build_exr=no])
-
-if test "x$build_exr" = "xyes" ; then
-	PKG_CHECK_MODULES(OPENEXR, OpenEXR, [build_exr=yes], [build_exr=no])
-
-	if test "x$build_exr" = "xyes" ; then
-	   	AC_CONFIG_FILES([ PlugIns/EXRCodec/Makefile \
-    					 PlugIns/EXRCodec/src/Makefile \
-    					 PlugIns/EXRCodec/include/Makefile])
-		AC_SUBST(OPENEXR_CFLAGS)
-		AC_SUBST(OPENEXR_LIBS)
-
-	fi
-
-fi
-
-AM_CONDITIONAL(BUILD_EXRPLUGIN, test x$build_exr = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_CG],
-[AC_ARG_ENABLE(cg,
-              AC_HELP_STRING([--disable-cg],
-                             [Do not build the Cg plugin (recommended you do so!)]),
-              [build_cg=$enableval],
-              [build_cg=yes])
-
-if test "x$build_cg" = "xyes" ; then
-	AC_CHECK_LIB(Cg, cgCreateProgram,,AC_MSG_ERROR([
-	****************************************************************
-	* You do not have the nVidia Cg libraries installed.           *
-	* Go to http://developer.nvidia.com/object/cg_toolkit.html     *
-	* (Click on Cg_Linux.tar.gz).                                  *
-	* You can disable the building of Cg support by providing      *	
-	* --disable-cg to this configure script but this is highly     *
-	* discouraged as this breaks many of the examples.             *
-	****************************************************************])
-	)
-fi
-
-AM_CONDITIONAL(BUILD_CGPLUGIN, test x$build_cg = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_CPPUNIT],
-[
-AM_PATH_CPPUNIT([1.9.0], [build_unit_tests=true])
-AM_CONDITIONAL([BUILD_UNIT_TESTS], [test x$build_unit_tests = xtrue])
-])
-
-
-AC_DEFUN([OGRE_CHECK_DX9],
-[AC_ARG_ENABLE(direct3d,
-              AC_HELP_STRING([--enable-direct3d],
-                             [Build the DirectX 9 Render System]),
-              [build_dx9=$enableval],
-              [build_dx9=no])
-
-AM_CONDITIONAL(BUILD_DX9RENDERSYSTEM, test x$build_dx9 = xyes)
-
-])
-
-AC_DEFUN([OGRE_CHECK_DEVIL],
-[AC_ARG_ENABLE(devil,
-              AC_HELP_STRING([--disable-devil],
-                             [Don't use DevIL for image loading. This is not recommended unless you provide your own image loading codecs.]),
-              [build_il=$enableval],
-              [build_il=yes])
-
-AM_CONDITIONAL(USE_DEVIL, test x$build_il = xyes)
-
-if test "x$build_il" = "xyes" ; then
-	AC_CHECK_LIB(IL, ilInit,,AC_MSG_ERROR([
-****************************************************************
-* You do not have DevIL installed.  This is required to build. *
-* You may find it at http://openil.sourceforge.net/.           *
-* Note: You can also provide --disable-devil to the build      *
-* process to build without DevIL. This is an advanced option   *
-* useful only if you provide your own image loading codecs.    *
-****************************************************************]))
-	AC_CHECK_LIB(ILU, iluFlipImage)
-	AC_DEFINE([OGRE_NO_DEVIL], [0], [Build devil])
-else
-	AC_DEFINE([OGRE_NO_DEVIL], [1], [Build devil])
-fi
-
-
-])
-
-
-AC_DEFUN([OGRE_CHECK_PIC],
-[
-AC_MSG_CHECKING([whether -fPIC is needed])
-    case $host in
-        x86_64-*)
-            CXXFLAGS="$CXXFLAGS -fPIC"
-            AC_MSG_RESULT(yes)
-        ;;
-        *)
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-])
-
-AC_DEFUN([OGRE_CHECK_CEGUI], [
-    PKG_CHECK_MODULES(CEGUI, CEGUI >= 0.3.0, 
-            [build_cegui_sample=true], [build_cegui_sample=false])
-    if test x$build_cegui_sample = xtrue; then
-        AC_CONFIG_FILES([Samples/Common/CEGUIRenderer/Makefile \
-                         Samples/Common/CEGUIRenderer/CEGUI-OGRE.pc
-                         Samples/Common/CEGUIRenderer/src/Makefile \
-                         Samples/Common/CEGUIRenderer/include/Makefile \
-                         Samples/Gui/Makefile \
-                         Samples/Gui/src/Makefile])
-        AC_SUBST(CEGUI_CFLAGS)
-        AC_SUBST(CEGUI_LIBS)
-        AC_MSG_RESULT([CEGUI available, Gui sample will be built])
-    else
-        AC_MSG_RESULT([CEGUI not available, Gui sample will not be built])
-    fi
-    AM_CONDITIONAL([BUILD_CEGUI_SAMPLE], [test x$build_cegui_sample = xtrue])
-])
-
-AC_DEFUN([OGRE_CHECK_DOUBLE],
-[
-AC_ARG_ENABLE(double,
-              AC_HELP_STRING([--enable-double],
-                             [Build OGRE in double floating point precision mode. This is not recommended for normal use as it is slower.]),
-              [build_double=$enableval],
-              [build_double=no])
-AC_MSG_CHECKING([whether to use double floating point precision])
-	case $build_double in
-        yes)
-			AC_DEFINE([OGRE_DOUBLE_PRECISION], [1], [Build with double precision])
-			AC_MSG_RESULT(yes)
-        ;;
-        *)
-			AC_DEFINE([OGRE_DOUBLE_PRECISION], [0], [Build with double precision])
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-])
-
-AC_DEFUN([OGRE_CHECK_THREADING],
-[
-AC_ARG_ENABLE(threading,
-              AC_HELP_STRING([--enable-threading],
-                             [Indicate general support for multithreading. This will enable threading support in certain parts of the engine, mainly resource loading and SharedPtr handling. WARNING: highly experimental, use with caution.]),
-              [build_threads=$enableval],
-              [build_threads=no])
-AC_MSG_CHECKING([whether to use threaded resource loading])
-	case $build_threads in
-        yes)
-            CXXFLAGS="$CXXFLAGS -pthread"
-            OGRE_THREAD_LIBS="-lboost_thread-mt"
-			AC_DEFINE([OGRE_THREAD_SUPPORT], [1], [Build with thread support])
-            AC_CHECK_LIB([boost_thread-mt], [main],, AC_MSG_ERROR([cannot find boost_thread-mt library]))
-            AC_MSG_RESULT(yes)
-        ;;
-        *)
-            OGRE_THREAD_LIBS=""
-			AC_DEFINE([OGRE_THREAD_SUPPORT], [0], [Build with thread support])
-            AC_MSG_RESULT(no)
-        ;;
-    esac
-    AC_SUBST(OGRE_THREAD_LIBS)
-])
-
-
-dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
-dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
-dnl also defines GSTUFF_PKG_ERRORS on error
-AC_DEFUN(PKG_CHECK_MODULES, [
-  succeeded=no
-
-  if test -z "$PKG_CONFIG"; then
-    AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
-  fi
-
-  if test "$PKG_CONFIG" = "no" ; then
-     echo "*** The pkg-config script could not be found. Make sure it is"
-     echo "*** in your path, or set the PKG_CONFIG environment variable"
-     echo "*** to the full path to pkg-config."
-     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
-  else
-     PKG_CONFIG_MIN_VERSION=0.9.0
-     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
-        AC_MSG_CHECKING(for $2)
-
-        if $PKG_CONFIG --exists "$2" ; then
-            AC_MSG_RESULT(yes)
-            succeeded=yes
-
-            AC_MSG_CHECKING($1_CFLAGS)
-            $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
-            AC_MSG_RESULT($$1_CFLAGS)
-
-            AC_MSG_CHECKING($1_LIBS)
-            $1_LIBS=`$PKG_CONFIG --libs "$2"`
-            AC_MSG_RESULT($$1_LIBS)
-        else
-            $1_CFLAGS=""
-            $1_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but 
-            ## do set a variable so people can do so.
-            $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
-            ifelse([$4], ,echo $$1_PKG_ERRORS,)
-        fi
-
-        AC_SUBST($1_CFLAGS)
-        AC_SUBST($1_LIBS)
-     else
-        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
-        echo "*** See http://www.freedesktop.org/software/pkgconfig"
-     fi
-  fi
-
-  if test $succeeded = yes; then
-     ifelse([$3], , :, [$3])
-  else
-     ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
-  fi
-])
-
-
-
-# Configure paths for SDL
-# Sam Lantinga 9/21/99
-# stolen from Manish Singh
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
-dnl
-AC_DEFUN([AM_PATH_SDL],
-[dnl 
-dnl Get the cflags and libraries from the sdl-config script
-dnl
-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
-            sdl_prefix="$withval", sdl_prefix="")
-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
-		    , enable_sdltest=yes)
-
-  if test x$sdl_exec_prefix != x ; then
-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
-     fi
-  fi
-  if test x$sdl_prefix != x ; then
-     sdl_args="$sdl_args --prefix=$sdl_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
-     fi
-  fi
-
-  AC_REQUIRE([AC_CANONICAL_TARGET])
-  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
-  no_sdl=""
-  if test "$SDL_CONFIG" = "no" ; then
-    no_sdl=yes
-  else
-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
-
-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_sdltest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $SDL_CFLAGS"
-      LIBS="$LIBS $SDL_LIBS"
-dnl
-dnl Now check if the installed SDL is sufficiently new. (Also sanity
-dnl checks the results of sdl-config to some extent
-dnl
-      rm -f conf.sdltest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "SDL.h"
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main (int argc, char *argv[])
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  /* This hangs on some systems (?)
-  system ("touch conf.sdltest");
-  */
-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_sdl_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_sdl_version");
-     exit(1);
-   }
-
-   if (($sdl_major_version > major) ||
-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_sdl" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$SDL_CONFIG" = "no" ; then
-       echo "*** The sdl-config script installed by SDL could not be found"
-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
-       echo "*** full path to sdl-config."
-     else
-       if test -f conf.sdltest ; then
-        :
-       else
-          echo "*** Could not run SDL test program, checking why..."
-          CFLAGS="$CFLAGS $SDL_CFLAGS"
-          LIBS="$LIBS $SDL_LIBS"
-          AC_TRY_LINK([
-#include <stdio.h>
-#include "SDL.h"
-
-int main(int argc, char *argv[])
-{ return 0; }
-#undef  main
-#define main K_and_R_C_main
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     SDL_CFLAGS=""
-     SDL_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(SDL_CFLAGS)
-  AC_SUBST(SDL_LIBS)
-  rm -f conf.sdltest
-])
-
-# AM_CONDITIONAL                                              -*- Autoconf -*-
-
-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 5
-
-AC_PREREQ(2.52)
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
-fi])])
-
-dnl
-dnl AM_PATH_CPPUNIT(MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
-dnl
-AC_DEFUN([AM_PATH_CPPUNIT],
-[
-
-AC_ARG_WITH(cppunit-prefix,[  --with-cppunit-prefix=PFX   Prefix where CppUnit is installed (optional)],
-            cppunit_config_prefix="$withval", cppunit_config_prefix="")
-AC_ARG_WITH(cppunit-exec-prefix,[  --with-cppunit-exec-prefix=PFX  Exec prefix where CppUnit is installed (optional)],
-            cppunit_config_exec_prefix="$withval", cppunit_config_exec_prefix="")
-
-  if test x$cppunit_config_exec_prefix != x ; then
-     cppunit_config_args="$cppunit_config_args --exec-prefix=$cppunit_config_exec_prefix"
-     if test x${CPPUNIT_CONFIG+set} != xset ; then
-        CPPUNIT_CONFIG=$cppunit_config_exec_prefix/bin/cppunit-config
-     fi
-  fi
-  if test x$cppunit_config_prefix != x ; then
-     cppunit_config_args="$cppunit_config_args --prefix=$cppunit_config_prefix"
-     if test x${CPPUNIT_CONFIG+set} != xset ; then
-        CPPUNIT_CONFIG=$cppunit_config_prefix/bin/cppunit-config
-     fi
-  fi
-
-  AC_PATH_PROG(CPPUNIT_CONFIG, cppunit-config, no)
-  cppunit_version_min=$1
-
-  AC_MSG_CHECKING(for Cppunit - version >= $cppunit_version_min)
-  no_cppunit=""
-  if test "$CPPUNIT_CONFIG" = "no" ; then
-    no_cppunit=yes
-  else
-    CPPUNIT_CFLAGS=`$CPPUNIT_CONFIG --cflags`
-    CPPUNIT_LIBS=`$CPPUNIT_CONFIG --libs`
-    cppunit_version=`$CPPUNIT_CONFIG --version`
-
-    cppunit_major_version=`echo $cppunit_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    cppunit_minor_version=`echo $cppunit_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    cppunit_micro_version=`echo $cppunit_version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
-    cppunit_major_min=`echo $cppunit_version_min | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    cppunit_minor_min=`echo $cppunit_version_min | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    cppunit_micro_min=`echo $cppunit_version_min | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-
-    cppunit_version_proper=`expr \
-        $cppunit_major_version \> $cppunit_major_min \| \
-        $cppunit_major_version \= $cppunit_major_min \& \
-        $cppunit_minor_version \> $cppunit_minor_min \| \
-        $cppunit_major_version \= $cppunit_major_min \& \
-        $cppunit_minor_version \= $cppunit_minor_min \& \
-        $cppunit_micro_version \>= $cppunit_micro_min `
-
-    if test "$cppunit_version_proper" = "1" ; then
-      AC_MSG_RESULT([$cppunit_major_version.$cppunit_minor_version.$cppunit_micro_version])
-    else
-      AC_MSG_RESULT(no)
-      no_cppunit=yes
-    fi
-  fi
-
-  if test "x$no_cppunit" = x ; then
-     ifelse([$2], , :, [$2])     
-  else
-     CPPUNIT_CFLAGS=""
-     CPPUNIT_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-
-  AC_SUBST(CPPUNIT_CFLAGS)
-  AC_SUBST(CPPUNIT_LIBS)
-])
-
-
-
-
-# Do all the work for Automake.                            -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 10
-
-AC_PREREQ([2.54])
-
-# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
-# the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $1 | $1:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.7.5])])
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-
-# Copyright 2001, 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-#  -*- Autoconf -*-
-
-
-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-# Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# AM_PROG_INSTALL_STRIP
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-#                                                          -*- Autoconf -*-
-# Copyright (C) 2003  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# serial 5						-*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored.
-      if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.   -*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Check to see how 'make' treats includes.	-*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# serial 2
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-
-# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-])
-
-
-# Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-AC_PREREQ(2.50)
-
-# AM_PROG_LEX
-# -----------
-# Autoconf leaves LEX=: if lex or flex can't be found.  Change that to a
-# "missing" invocation, for better error output.
-AC_DEFUN([AM_PROG_LEX],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])dnl
-AC_REQUIRE([AC_PROG_LEX])dnl
-if test "$LEX" = :; then
-  LEX=${am_missing_run}flex
-fi])
-
-# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
-
-# serial 46 AC_PROG_LIBTOOL
-
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])
-
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-_LT_AC_PROG_ECHO_BACKSLASH
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
-  fi
-  ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-linux*)
-  # Test if the compiler is 64bit
-  echo 'int i;' > conftest.$ac_ext
-  lt_cv_cc_64bit_output=no
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *"ELF 64"*)
-      lt_cv_cc_64bit_output=yes
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-  
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_SAVE
-     AC_LANG_C
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_RESTORE])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
-  # recent cygwin and mingw systems supply a stub DllMain which the user
-  # can override, but on older systems we have to supply one
-  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
-    [AC_TRY_LINK([],
-      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
-      DllMain (0, 0, 0);],
-      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
-  case $host/$CC in
-  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
-    # old mingw systems require "-dll" to link a DLL, while more recent ones
-    # require "-mdll"
-    SAVE_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS -mdll"
-    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
-      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
-    CFLAGS="$SAVE_CFLAGS" ;;
-  *-*-cygwin* | *-*-pw32*)
-    # cygwin systems need to pass --dll to the linker, and not link
-    # crt.o which will require a WinMain@16 definition.
-    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
-  esac
-  ;;
-  ])
-esac
-
-_LT_AC_LTCONFIG_HACK
-
-])
-
-# AC_LIBTOOL_HEADER_ASSERT
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
-[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
-    [lt_cv_func_assert_works],
-    [case $host in
-    *-*-solaris*)
-      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
-        case `$CC --version 2>/dev/null` in
-        [[12]].*) lt_cv_func_assert_works=no ;;
-        *)        lt_cv_func_assert_works=yes ;;
-        esac
-      fi
-      ;;
-    esac])
-
-if test "x$lt_cv_func_assert_works" = xyes; then
-  AC_CHECK_HEADERS(assert.h)
-fi
-])# AC_LIBTOOL_HEADER_ASSERT
-
-# _LT_AC_CHECK_DLFCN
-# --------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)
-])# _LT_AC_CHECK_DLFCN
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris* | sysv5*)
-  symcode='[[BDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $host_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[[ABCDGISTW]]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Write the raw and C identifiers.
-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  save_LIBS="$LIBS"
-	  save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$no_builtin_flag"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$save_LIBS"
-	  CFLAGS="$save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
-    fi
-  else
-    echo "$progname: failed program was:" >&AC_FD_CC
-    cat conftest.$ac_ext >&5
-  fi
-  rm -f conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  global_symbol_to_cdecl=
-  global_symbol_to_c_name_address=
-else
-  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
-  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
-fi
-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
-then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-# ---------------------------------
-AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
-[# Find the correct PATH separator.  Usually this is `:', but
-# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != Xset; then
-  UNAME=${UNAME-`uname 2>/dev/null`}
-  case X$UNAME in
-    *-DOS) lt_cv_sys_path_separator=';' ;;
-    *)     lt_cv_sys_path_separator=':' ;;
-  esac
-  PATH_SEPARATOR=$lt_cv_sys_path_separator
-fi
-])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-			      [AC_DIVERT_PUSH(NOTICE)])
-_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
-       echo_test_string="`eval $cmd`" &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
-
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
-
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
-
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
-      fi
-    fi
-  fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-AC_DIVERT_POP
-])# _LT_AC_PROG_ECHO_BACKSLASH
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_unknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-# AC_LIBTOOL_DLOPEN_SELF
-# -------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-          [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      LDFLAGS="$LDFLAGS $link_static_flag"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-AC_DEFUN([_LT_AC_LTCONFIG_HACK],
-[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except M$VC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-need_locks="$enable_libtool_lock"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-if test x"$host" != x"$build"; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case $host_os in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
-    ;;
-  *)
-    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="[$]2"
-
-AC_MSG_CHECKING([for objdir])
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-AC_MSG_RESULT($objdir)
-
-
-AC_ARG_WITH(pic,
-[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
-pic_mode="$withval", pic_mode=default)
-test -z "$pic_mode" && pic_mode=default
-
-# We assume here that the value for lt_cv_prog_cc_pic will not be cached
-# in isolation, and that seeing it set (from the cache) indicates that
-# the associated values are set (in the cache) correctly too.
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-AC_CACHE_VAL(lt_cv_prog_cc_pic,
-[ lt_cv_prog_cc_pic=
-  lt_cv_prog_cc_shlib=
-  lt_cv_prog_cc_wl=
-  lt_cv_prog_cc_static=
-  lt_cv_prog_cc_no_builtin=
-  lt_cv_prog_cc_can_build_shared=$can_build_shared
-
-  if test "$GCC" = yes; then
-    lt_cv_prog_cc_wl='-Wl,'
-    lt_cv_prog_cc_static='-static'
-
-    case $host_os in
-    aix*)
-      # Below there is a dirty hack to force normal static linking with -ldl
-      # The problem is because libdl dynamically linked with both libc and
-      # libC (AIX C++ library), which obviously doesn't included in libraries
-      # list by gcc. This cause undefined symbols with -static flags.
-      # This hack allows C programs to be linked with "-static -ldl", but
-      # not sure about C++ programs.
-      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
-      ;;
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	 lt_cv_prog_cc_pic=-Kconform_pic
-      fi
-      ;;
-    *)
-      lt_cv_prog_cc_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for PIC flags for the system compiler.
-    case $host_os in
-    aix3* | aix4* | aix5*)
-      lt_cv_prog_cc_wl='-Wl,'
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_cv_prog_cc_static='-Bstatic'
-      else
-	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
-      lt_cv_prog_cc_pic='+Z'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      # PIC (with -KPIC) is the default.
-      ;;
-
-    cygwin* | mingw* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-
-    newsos6)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      # All OSF/1 code is PIC.
-      lt_cv_prog_cc_wl='-Wl,'
-      lt_cv_prog_cc_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      lt_cv_prog_cc_pic='-Kpic'
-      lt_cv_prog_cc_static='-dn'
-      lt_cv_prog_cc_shlib='-belf'
-      ;;
-
-    solaris*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    sunos4*)
-      lt_cv_prog_cc_pic='-PIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Qoption ld '
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      lt_cv_prog_cc_pic='-KPIC'
-      lt_cv_prog_cc_static='-Bstatic'
-      lt_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    uts4*)
-      lt_cv_prog_cc_pic='-pic'
-      lt_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_cv_prog_cc_pic='-Kconform_pic'
-	lt_cv_prog_cc_static='-Bstatic'
-      fi
-      ;;
-
-    *)
-      lt_cv_prog_cc_can_build_shared=no
-      ;;
-    esac
-  fi
-])
-if test -z "$lt_cv_prog_cc_pic"; then
-  AC_MSG_RESULT([none])
-else
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic])
-
-  # Check to make sure the pic_flag actually works.
-  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
-  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
-    save_CFLAGS="$CFLAGS"
-    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
-    AC_TRY_COMPILE([], [], [dnl
-      case $host_os in
-      hpux9* | hpux10* | hpux11*)
-	# On HP-UX, both CC and GCC only warn that PIC is supported... then
-	# they create non-PIC objects.  So, if there were any warnings, we
-	# assume that PIC is not supported.
-	if test -s conftest.err; then
-	  lt_cv_prog_cc_pic_works=no
-	else
-	  lt_cv_prog_cc_pic_works=yes
-	fi
-	;;
-      *)
-	lt_cv_prog_cc_pic_works=yes
-	;;
-      esac
-    ], [dnl
-      lt_cv_prog_cc_pic_works=no
-    ])
-    CFLAGS="$save_CFLAGS"
-  ])
-
-  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
-    lt_cv_prog_cc_pic=
-    lt_cv_prog_cc_can_build_shared=no
-  else
-    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
-  fi
-
-  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$lt_cv_prog_cc_shlib"; then
-  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
-  else
-   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
-    lt_cv_prog_cc_can_build_shared=no
-  fi
-fi
-
-AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
-AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
-  lt_cv_prog_cc_static_works=no
-  save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
-  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
-  LDFLAGS="$save_LDFLAGS"
-])
-
-# Belt *and* braces to stop my trousers falling down:
-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
-AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
-
-pic_flag="$lt_cv_prog_cc_pic"
-special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
-wl="$lt_cv_prog_cc_wl"
-link_static_flag="$lt_cv_prog_cc_static"
-no_builtin_flag="$lt_cv_prog_cc_no_builtin"
-can_build_shared="$lt_cv_prog_cc_can_build_shared"
-
-
-# Check to see if options -o and -c are simultaneously supported by compiler
-AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
-AC_CACHE_VAL([lt_cv_compiler_c_o], [
-$rm -r conftest 2>/dev/null
-mkdir conftest
-cd conftest
-echo "int some_variable = 0;" > conftest.$ac_ext
-mkdir out
-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
-# that will create temporary files in the current directory regardless of
-# the output directory.  Thus, making CWD read-only will cause this test
-# to fail, enabling locking or at least warning the user not to do parallel
-# builds.
-chmod -w .
-save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
-compiler_c_o=no
-if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
-  # The compiler can only warn and ignore the option if not recognized
-  # So say no if there are warnings
-  if test -s out/conftest.err; then
-    lt_cv_compiler_c_o=no
-  else
-    lt_cv_compiler_c_o=yes
-  fi
-else
-  # Append any errors to the config.log.
-  cat out/conftest.err 1>&AC_FD_CC
-  lt_cv_compiler_c_o=no
-fi
-CFLAGS="$save_CFLAGS"
-chmod u+w .
-$rm conftest* out/*
-rmdir out
-cd ..
-rmdir conftest
-$rm -r conftest 2>/dev/null
-])
-compiler_c_o=$lt_cv_compiler_c_o
-AC_MSG_RESULT([$compiler_c_o])
-
-if test x"$compiler_c_o" = x"yes"; then
-  # Check to see if we can write to a .lo
-  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
-  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
-  lt_cv_compiler_o_lo=no
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -c -o conftest.lo"
-  save_objext="$ac_objext"
-  ac_objext=lo
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      lt_cv_compiler_o_lo=no
-    else
-      lt_cv_compiler_o_lo=yes
-    fi
-  ])
-  ac_objext="$save_objext"
-  CFLAGS="$save_CFLAGS"
-  ])
-  compiler_o_lo=$lt_cv_compiler_o_lo
-  AC_MSG_RESULT([$compiler_o_lo])
-else
-  compiler_o_lo=no
-fi
-
-# Check to see if we can do hard links to lock some files if needed
-hard_links="nottested"
-if test "$compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-if test "$GCC" = yes; then
-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
-  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
-  compiler_rtti_exceptions=no
-  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
-    # The compiler can only warn and ignore the option if not recognized
-    # So say no if there are warnings
-    if test -s conftest.err; then
-      compiler_rtti_exceptions=no
-    else
-      compiler_rtti_exceptions=yes
-    fi
-  ])
-  CFLAGS="$save_CFLAGS"
-  AC_MSG_RESULT([$compiler_rtti_exceptions])
-
-  if test "$compiler_rtti_exceptions" = "yes"; then
-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
-  else
-    no_builtin_flag=' -fno-builtin'
-  fi
-fi
-
-# See if the linker supports building shared libraries.
-AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
-
-allow_undefined_flag=
-no_undefined_flag=
-need_lib_prefix=unknown
-need_version=unknown
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-archive_cmds=
-archive_expsym_cmds=
-old_archive_from_new_cmds=
-old_archive_from_expsyms_cmds=
-export_dynamic_flag_spec=
-whole_archive_flag_spec=
-thread_safe_flag_spec=
-hardcode_into_libs=no
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-link_all_deplibs=unknown
-always_export_symbols=no
-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
-# include_expsyms should be a list of space-separated symbols to be *always*
-# included in the symbol list
-include_expsyms=
-# exclude_expsyms can be an egrep regular expression of symbols to exclude
-# it will be wrapped by ` (' and `)$', so one must not match beginning or
-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-# as well as any symbol that contains `d'.
-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-# platforms (ab)use it in PIC code, but their linkers get confused if
-# the symbol is explicitly referenced.  Since portable code cannot
-# rely on this symbol name, it's probably fine to never include it in
-# preloaded symbol tables.
-extract_expsyms_cmds=
-
-case $host_os in
-cygwin* | mingw* | pw32*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$GCC" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-openbsd*)
-  with_gnu_ld=no
-  ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX, the GNU linker is very broken
-    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
-    ld_shlibs=no
-    cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
-
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname-def;
-      else
-	echo EXPORTS > $output_objdir/$soname-def;
-	_lt_hint=1;
-	cat $export_symbols | while read symbol; do
-	 set dummy \$symbol;
-	 case \[$]# in
-	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-	   4) echo "   \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
-	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-	 esac;
-	 _lt_hint=`expr 1 + \$_lt_hint`;
-	done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
-    ;;
-
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw* | pw32*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$GCC" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	  ;;
-	  esac
-	done
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    hardcode_direct=yes
-    archive_cmds=''
-    hardcode_libdir_separator=':'
-    if test "$GCC" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	  strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  hardcode_direct=yes
-	else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-	fi
-      esac
-
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	shared_flag='${wl}-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
-
-    # It seems that -bexpall can do strange things, so it is better to
-    # generate a list of symbols to export.
-    always_export_symbols=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag='-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-    else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag="-z nodefs"
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-      else
-	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='${wl}-berok'
-	# This is a bit strange, but is similar to how AIX traditionally builds
-	# it's shared libraries.
-	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
-      fi
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
-
-  darwin* | rhapsody*)
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      allow_undefined_flag='-flat_namespace -undefined suppress'
-      ;;
-    esac
-    # FIXME: Relying on posixy $() will cause problems for
-    #        cross-compilation, but unfortunately the echo tests do not
-    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
-    #	     `"' quotes if we put them in here... so don't!
-    archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case $host_os in
-    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
-    esac
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_direct=yes
-    hardcode_minus_L=yes # Not in the search PATH, but as the default
-			 # location of the library.
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6* | nonstopux*)
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-    else
-      case "$host_os" in
-      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_libdir_flag_spec='-R$libdir'
-        ;;
-      *)
-        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-        ;;
-      esac
-    fi
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$GCC" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-      #Both c and cxx compiler support -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    export_dynamic_flag_spec='${wl}-Bexport'
-    ;;
-
-  solaris*)
-    # gcc --version < 3.0 without binutils cannot create self contained
-    # shared libraries reliably, requiring libgcc.a to resolve some of
-    # the object symbols generated in some cases.  Libraries that use
-    # assert need libgcc.a to resolve __eprintf, for example.  Linking
-    # a copy of libgcc.a into every shared library to guarantee resolving
-    # such symbols causes other problems:  According to Tim Van Holder
-    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
-    # (to the application) exception stack for one thing.
-    no_undefined_flag=' -z defs'
-    if test "$GCC" = yes; then
-      case `$CC --version 2>/dev/null` in
-      [[12]].*)
-	cat <<EOF 1>&2
-
-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
-*** create self contained shared libraries on Solaris systems, without
-*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
-*** -no-undefined support, which will at least allow you to build shared
-*** libraries.  However, you may find that when you link such libraries
-*** into an application without using GCC, you have to manually add
-*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
-*** upgrade to a newer version of GCC.  Another option is to rebuild your
-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
-
-EOF
-        no_undefined_flag=
-	;;
-      esac
-    fi
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case $host_os in
-    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    link_all_deplibs=yes
-    ;;
-
-  sunos4*)
-    if test "x$host_vendor" = xsequent; then
-      # Use $CC to link under sequent, because it throws in some extra .o
-      # files that make .init and .fini sections work.
-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-    fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    case $host_vendor in
-      sni)
-        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_direct=yes # is this really true???
-        ;;
-      siemens)
-        ## LD is ld it makes a PLAMLIB
-        ## CC just makes a GrossModule.
-        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-        reload_cmds='$CC -r -o $output$reload_objs'
-        hardcode_direct=no
-        ;;
-      motorola)
-        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-        ;;
-    esac
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
-fi
-AC_MSG_RESULT([$ld_shlibs])
-test "$ld_shlibs" = no && can_build_shared=no
-
-# Check hardcoding attributes.
-AC_MSG_CHECKING([how to hardcode library paths into programs])
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$hardcode_shlibpath_var" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-AC_MSG_RESULT([$hardcode_action])
-
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-  AC_MSG_RESULT([no])
-fi
-
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-# PORTME Fill in your ld.so characteristics
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/X11R6/lib"
-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib /usr/X11R6/lib"
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so$major'
-  ;;
-
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	     echo ' yes '
-	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	  :
-	else
-	  can_build_shared=no
-	fi
-	;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can
-    # not hardcode correct soname into executable. Probably we can
-    # add versioning support to collect2, so additional links can
-    # be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}.so$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  hardcode_into_libs=yes
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}.so'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi4*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  export_dynamic_flag_spec=-rdynamic
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  need_version=no
-  need_lib_prefix=no
-  case $GCC,$host_os in
-  yes,cygwin*)
-    library_names_spec='$libname.dll.a'
-    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog .libs/$dlname \$dldir/$dlname'
-    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    ;;
-  yes,mingw*)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
-    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
-    ;;
-  yes,pw32*)
-    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
-    ;;
-  *)
-    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  # FIXME: Relying on posixy $() will cause problems for
-  #        cross-compilation, but unfortunately the echo tests do not
-  #        yet detect zsh echo's removal of \ escapes.
-  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
-  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd*)
-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  *)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  dynamic_linker="$host_os dld.sl"
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  shlibpath_var=SHLIB_PATH
-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
-  soname_spec='${libname}${release}.sl$major'
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)          version_type=irix ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  case $host_cpu:$lt_cv_cc_64bit_output in
-  powerpc64:yes | s390x:yes | sparc64:yes | x86_64:yes)
-    sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /usr/X11R6/lib64"
-    sys_lib_search_path_spec="/lib64 /usr/lib64 /usr/local/lib64 /usr/X11R6/lib64"
-    ;;
-  esac
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-
-  # Find out which ABI we are using (multilib Linux x86_64 hack).
-  libsuff=
-  case "$host_cpu" in
-  x86_64*)
-    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-    if AC_TRY_EVAL(ac_compile); then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  *)
-    ;;
-  esac
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-  sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
-    soname_spec='${libname}${release}.so$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case "$host_os" in
-    openbsd2.[[89]] | openbsd2.[[89]].*)
-      shlibpath_overrides_runpath=no
-      ;;
-    *)
-      shlibpath_overrides_runpath=yes
-      ;;
-    esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-os2*)
-  libname_spec='$name'
-  need_lib_prefix=no
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_version=no
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  hardcode_into_libs=yes
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so$major'
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
-  soname_spec='${libname}${release}.so$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
-    soname_spec='$libname.so.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-
-aix4*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-AC_LIBTOOL_DLOPEN_SELF
-
-if test "$enable_shared" = yes && test "$GCC" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
-    [$rm conftest*
-    echo 'static int dummy;' > conftest.$ac_ext
-
-    if AC_TRY_EVAL(ac_compile); then
-      soname=conftest
-      lib=conftest
-      libobjs=conftest.$ac_objext
-      deplibs=
-      wl=$lt_cv_prog_cc_wl
-      compiler_flags=-v
-      linker_flags=-v
-      verstring=
-      output_objdir=.
-      libname=conftest
-      save_allow_undefined_flag=$allow_undefined_flag
-      allow_undefined_flag=
-      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-      then
-	lt_cv_archive_cmds_need_lc=no
-      else
-	lt_cv_archive_cmds_need_lc=yes
-      fi
-      allow_undefined_flag=$save_allow_undefined_flag
-    else
-      cat conftest.err 1>&5
-    fi])
-    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
-    ;;
-  esac
-fi
-need_lc=${lt_cv_archive_cmds_need_lc-yes}
-
-# The second clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  :
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  test -f Makefile && make "$ltmain"
-fi
-
-if test -f "$ltmain"; then
-  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
-  $rm -f "${ofile}T"
-
-  echo creating $ofile
-
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS SED \
-    AR AR_FLAGS CC LD LN_S NM SHELL \
-    reload_flag reload_cmds wl \
-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
-    library_names_spec soname_spec \
-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
-    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
-    old_striplib striplib file_magic_cmd export_symbols_cmds \
-    deplibs_check_method allow_undefined_flag no_undefined_flag \
-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
-    global_symbol_to_c_name_address \
-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
-
-    case $var in
-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
-    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  cat <<__EOF__ > "${ofile}T"
-#! $SHELL
-
-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996-2000 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="${SED} -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$need_lc
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# The default C compiler.
-CC=$lt_CC
-
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_wl
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_pic_flag
-pic_mode=$pic_mode
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_compiler_c_o
-
-# Can we write directly to a .lo ?
-compiler_o_lo=$lt_compiler_o_lo
-
-# Must we lock files when doing compilation ?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_link_static_flag
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_no_builtin_flag
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "${ofile}T"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | os2*)
-    cat <<'EOF' >> "${ofile}T"
-      # This is a source program that is used to create dlls on Windows
-      # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-	# This is a source program that is used to create import libraries
-	# on Windows for dlls which lack them. Don't remove nor modify the
-	# starting and closing comments
-# /* impgen.c starts here */
-# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
-#
-#  This file is part of GNU libtool.
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#  */
-#
-# #include <stdio.h>		/* for printf() */
-# #include <unistd.h>		/* for open(), lseek(), read() */
-# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
-# #include <string.h>		/* for strdup() */
-#
-# /* O_BINARY isn't required (or even defined sometimes) under Unix */
-# #ifndef O_BINARY
-# #define O_BINARY 0
-# #endif
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-#      int fd;
-#      int offset;
-# {
-#   unsigned char b[2];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 2);
-#   return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-#     int fd;
-#     int offset;
-# {
-#   unsigned char b[4];
-#   lseek (fd, offset, SEEK_SET);
-#   read (fd, b, 4);
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-#      void *ptr;
-# {
-#   unsigned char *b = ptr;
-#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-#     int argc;
-#     char *argv[];
-# {
-#     int dll;
-#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-#     unsigned long export_rva, export_size, nsections, secptr, expptr;
-#     unsigned long name_rvas, nexp;
-#     unsigned char *expdata, *erva;
-#     char *filename, *dll_name;
-#
-#     filename = argv[1];
-#
-#     dll = open(filename, O_RDONLY|O_BINARY);
-#     if (dll < 1)
-# 	return 1;
-#
-#     dll_name = filename;
-#
-#     for (i=0; filename[i]; i++)
-# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
-# 	    dll_name = filename + i +1;
-#
-#     pe_header_offset = pe_get32 (dll, 0x3c);
-#     opthdr_ofs = pe_header_offset + 4 + 20;
-#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-#     if (num_entries < 1) /* no exports */
-# 	return 1;
-#
-#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
-#     export_size = pe_get32 (dll, opthdr_ofs + 100);
-#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-#     secptr = (pe_header_offset + 4 + 20 +
-# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-#     expptr = 0;
-#     for (i = 0; i < nsections; i++)
-#     {
-# 	char sname[8];
-# 	unsigned long secptr1 = secptr + 40 * i;
-# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# 	lseek(dll, secptr1, SEEK_SET);
-# 	read(dll, sname, 8);
-# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# 	{
-# 	    expptr = fptr + (export_rva - vaddr);
-# 	    if (export_rva + export_size > vaddr + vsize)
-# 		export_size = vsize - (export_rva - vaddr);
-# 	    break;
-# 	}
-#     }
-#
-#     expdata = (unsigned char*)malloc(export_size);
-#     lseek (dll, expptr, SEEK_SET);
-#     read (dll, expdata, export_size);
-#     erva = expdata - export_rva;
-#
-#     nexp = pe_as32 (expdata+24);
-#     name_rvas = pe_as32 (expdata+32);
-#
-#     printf ("EXPORTS\n");
-#     for (i = 0; i<nexp; i++)
-#     {
-# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-#     }
-#
-#     return 0;
-# }
-# /* impgen.c ends here */
-
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
-
-  mv -f "${ofile}T" "$ofile" || \
-    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
-  chmod +x "$ofile"
-fi
-
-])# _LT_AC_LTCONFIG_HACK
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
-#   `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-# AC_PROG_LD_GNU -
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* | pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.[[012]])
-    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  ;;
-
-freebsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libc.sl
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-  irix5* | nonstopux*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  case $host_cpu in
-  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | s390* | x86_64*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
-  ;;
-
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
-  else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[[78]]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
-AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and LTDLINCL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and LTDLINCL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and LTDLINCL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_executable_p="test -f"
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-
-  # Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-: ${TMPDIR=/tmp}
-{
-  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=$TMPDIR/sed$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
-   { (exit 1); exit 1; }
-}
-  _max=0
-  _count=0
-  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
-  # along with /bin/sed that truncates output.
-  for _sed in $_sed_list /usr/xpg4/bin/sed; do
-    test ! -f ${_sed} && break
-    cat /dev/null > "$tmp/sed.in"
-    _count=0
-    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
-    # Check for GNU sed and select it if it is found.
-    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
-      lt_cv_path_SED=${_sed}
-      break
-    fi
-    while true; do
-      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
-      mv "$tmp/sed.tmp" "$tmp/sed.in"
-      cp "$tmp/sed.in" "$tmp/sed.nl"
-      echo >>"$tmp/sed.nl"
-      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
-      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
-      # 40000 chars as input seems more than enough
-      test $_count -gt 10 && break
-      _count=`expr $_count + 1`
-      if test $_count -gt $_max; then
-        _max=$_count
-        lt_cv_path_SED=$_sed
-      fi
-    done
-  done
-  rm -rf "$tmp"
-])
-if test "X$SED" != "X"; then
-  lt_cv_path_SED=$SED
-else
-  SED=$lt_cv_path_SED
-fi
-AC_MSG_RESULT([$SED])
-])
-
Index: OGRE/trunk/ogrenew/install-sh
===================================================================
--- OGRE/trunk/ogrenew/install-sh	(revision 657)
+++ 	(revision )
@@ -1,294 +1,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-#
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
-	shift
-
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-	rmtmp=$dstdir/#rm.$$#
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
-
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-
-{
-	(exit 0); exit
-}
