http://xml.apache.org/http://www.apache.org/http://www.w3.org/

Home

Readme
Release Info

Installation
Download
Build

FAQs
Samples
API Docs

DOM C++ Binding
Programming
Migration Guide

Feedback
Bug-Reporting
PDF Document

CVS Repository
Mail Archive

API Docs for SAX and DOM
 

Main Page   Class Hierarchy   Alphabetical List   Compound List   File List   Compound Members   File Members  

XMLAttr Class Reference

This class defines the information about an attribute that will come out of the scanner during parsing. More...

Inheritance diagram for XMLAttr:

Inheritance graph
[legend]
Collaboration diagram for XMLAttr:

Collaboration graph
[legend]
List of all members.

Public Methods

Constructors
 XMLAttr (MemoryManager *const manager=XMLPlatformUtils::fgMemoryManager)
 The default constructor just setsup an empty attribute to be filled in the later. More...

 XMLAttr (const unsigned int uriId, const XMLCh *const attrName, const XMLCh *const attrPrefix, const XMLCh *const attrValue, const XMLAttDef::AttTypes type=XMLAttDef::CData, const bool specified=true, MemoryManager *const manager=XMLPlatformUtils::fgMemoryManager, DatatypeValidator *datatypeValidator=0, const bool isSchema=false)
 This is the primary constructor which takes all of the information required to construct a complete attribute object. More...

 XMLAttr (const unsigned int uriId, const XMLCh *const rawName, const XMLCh *const attrValue, const XMLAttDef::AttTypes type=XMLAttDef::CData, const bool specified=true, MemoryManager *const manager=XMLPlatformUtils::fgMemoryManager, DatatypeValidator *datatypeValidator=0, const bool isSchema=false)
 This is the primary constructor which takes all of the information required to construct a complete attribute object. More...

Destructor
 ~XMLAttr ()
Getter methods
QNamegetAttName () const
 This methode returns the attribute name in a QName format. More...

const XMLCh * getName () const
 This method gets a const pointer tot he name of the attribute. More...

const XMLCh * getPrefix () const
 This method will get a const pointer to the prefix string of this attribute. More...

const XMLCh * getQName () const
 This method will get the QName of this attribute, which will be the prefix if any, then a colon, then the base name. More...

bool getSpecified () const
 This method will get the specified flag, which indicates whether the attribute was explicitly specified or just faulted in. More...

XMLAttDef::AttTypes getType () const
 This method will get the type of the attribute. More...

const XMLCh * getValue () const
 This method will get the value of the attribute. More...

unsigned int getURIId () const
 This method will get the id of the URI that this attribute's prefix mapped to. More...

const XMLCh * getValidatingTypeURI () const
const XMLCh * getValidatingTypeName () const
Setter methods
void set (const unsigned int uriId, const XMLCh *const attrName, const XMLCh *const attrPrefix, const XMLCh *const attrValue, const XMLAttDef::AttTypes type=XMLAttDef::CData, DatatypeValidator *datatypeValidator=0, const bool isSchema=false)
 This method is called to set up a default constructed object after the fact, or to reuse a previously used object. More...

void set (const unsigned int uriId, const XMLCh *const attrRawName, const XMLCh *const attrValue, const XMLAttDef::AttTypes type=XMLAttDef::CData, DatatypeValidator *datatypeValidator=0, const bool isSchema=false)
 This method is called to set up a default constructed object after the fact, or to reuse a previously used object. More...

void setName (const unsigned int uriId, const XMLCh *const attrName, const XMLCh *const attrPrefix)
 This method will update just the name related fields of the attribute object. More...

void setSpecified (const bool newValue)
 This method will update the specified state of the object. More...

void setType (const XMLAttDef::AttTypes newType)
 This method will update the attribute type of the object. More...

void setValue (const XMLCh *const newValue)
 This method will update the value field of the attribute. More...

void setURIId (const unsigned int uriId)
 This method will set the URI id field of this attribute. More...

void setDatatypeValidator (DatatypeValidator *datatypeValidator)
 This method will update the datatype validator that was used to assess the validity of the value of this attribute. More...

void setSchemaValidated (const bool isSchema)
 This method will define whether the attribute was validated by an XML Schema. More...


Detailed Description

This class defines the information about an attribute that will come out of the scanner during parsing.

This information does not depend upon the type of validator because it is not tied to any scheme/DTD type info. Its just the raw XML 1.0 information that will be reported about an attribute in the startElement() callback method of the XMLDocumentHandler class. Hence it is not intended to be extended or derived from. Its designed to be used as is.

The 'specified' field of this class indicates whether the attribute was actually present or whether it was faulted in because it had a fixed or default value.

The code receiving this information can ask its validator for more info about the attribute, i.e. get its declaration from the DTD/Schema info.

Because of the heavy use (and reuse) of instances of this class, and the number of string members it has, this class takes pains to not reallocate string members unless it has to. It keeps up with how long each buffer is and only reallocates if the new value won't fit.


Constructor & Destructor Documentation

XMLAttr::XMLAttr MemoryManager *const    manager = XMLPlatformUtils::fgMemoryManager
 

The default constructor just setsup an empty attribute to be filled in the later.

Though the initial state is a reasonable one, it is not documented because it should not be depended on.

Parameters:
manager  The configurable memory manager

XMLAttr::XMLAttr const unsigned int    uriId,
const XMLCh *const    attrName,
const XMLCh *const    attrPrefix,
const XMLCh *const    attrValue,
const XMLAttDef::AttTypes    type = XMLAttDef::CData,
const bool    specified = true,
MemoryManager *const    manager = XMLPlatformUtils::fgMemoryManager,
DatatypeValidator *    datatypeValidator = 0,
const bool    isSchema = false
 

This is the primary constructor which takes all of the information required to construct a complete attribute object.

Parameters:
uriId  The id into the validator's URI pool of the URI that the prefix mapped to. Only used if namespaces are enabled/supported.
attrName  The base name of the attribute, i.e. the part after any prefix.
attrPrefix  The prefix, if any, of this attribute's name. If this is empty, then uriID is meaningless as well.
attrValue  The value string of the attribute, which should be fully normalized by XML rules!
type  The type of the attribute. This will indicate the type of normalization done and constrains the value content. Make sure that the value set meets the constraints!
specified  Indicates whether the attribute was explicitly specified or not. If not, then it was faulted in from a FIXED or DEFAULT value.
manager  The configurable memory manager
datatypeValidator  type used to validate the attribute, if it was validated by an XML Schema
isSchema  true if and only if this attribute was validated by an XML Schema

XMLAttr::XMLAttr const unsigned int    uriId,
const XMLCh *const    rawName,
const XMLCh *const    attrValue,
const XMLAttDef::AttTypes    type = XMLAttDef::CData,
const bool    specified = true,
MemoryManager *const    manager = XMLPlatformUtils::fgMemoryManager,
DatatypeValidator *    datatypeValidator = 0,
const bool    isSchema = false
 

This is the primary constructor which takes all of the information required to construct a complete attribute object.

Parameters:
uriId  The id into the validator's URI pool of the URI that the prefix mapped to. Only used if namespaces are enabled/supported.
rawName  The raw name of the attribute.
attrValue  The value string of the attribute, which should be fully normalized by XML rules!
type  The type of the attribute. This will indicate the type of normalization done and constrains the value content. Make sure that the value set meets the constraints!
specified  Indicates whether the attribute was explicitly specified or not. If not, then it was faulted in from a FIXED or DEFAULT value.
manager  The configurable memory manager
datatypeValidator  type used to validate the attribute, if it was validated by an XML Schema
isSchema  true if and only if this attribute was validated by an XML Schema

XMLAttr::~XMLAttr  
 


Member Function Documentation

QName * XMLAttr::getAttName   const
 

This methode returns the attribute name in a QName format.

const XMLCh * XMLAttr::getName   const
 

This method gets a const pointer tot he name of the attribute.

The form of this name is defined by the validator in use.

const XMLCh * XMLAttr::getPrefix   const
 

This method will get a const pointer to the prefix string of this attribute.

Since prefixes are optional, it may be zero.

const XMLCh* XMLAttr::getQName   const
 

This method will get the QName of this attribute, which will be the prefix if any, then a colon, then the base name.

If there was no prefix, its the same as the getName() method.

bool XMLAttr::getSpecified   const
 

This method will get the specified flag, which indicates whether the attribute was explicitly specified or just faulted in.

XMLAttDef::AttTypes XMLAttr::getType   const
 

This method will get the type of the attribute.

The available types are defined by the XML specification.

unsigned int XMLAttr::getURIId   const
 

This method will get the id of the URI that this attribute's prefix mapped to.

If namespaces are not on, then its value is meaningless.

const XMLCh * XMLAttr::getValidatingTypeName   const
 

Returns:
the name part of DOM Level 3 TypeInfo
Deprecated:

const XMLCh * XMLAttr::getValidatingTypeURI   const
 

Returns:
the uri part of DOM Level 3 TypeInfo
Deprecated:

const XMLCh * XMLAttr::getValue   const
 

This method will get the value of the attribute.

The value can be be an empty string, but never null if the object is correctly set up.

void XMLAttr::set const unsigned int    uriId,
const XMLCh *const    attrRawName,
const XMLCh *const    attrValue,
const XMLAttDef::AttTypes    type = XMLAttDef::CData,
DatatypeValidator *    datatypeValidator = 0,
const bool    isSchema = false
 

This method is called to set up a default constructed object after the fact, or to reuse a previously used object.

Parameters:
uriId  The id into the validator's URI pool of the URI that the prefix mapped to. Only used if namespaces are enabled/supported.
attrRawName  The raw name of the attribute.
attrValue  The value string of the attribute, which should be fully normalized by XML rules according to the attribute type.
type  The type of the attribute. This will indicate the type of normalization done and constrains the value content. Make sure that the value set meets the constraints!
datatypeValidator  type used to validate the attribute, if it was validated by an XML Schema
isSchema  true if and only if this attribute was validated by an XML Schema

void XMLAttr::set const unsigned int    uriId,
const XMLCh *const    attrName,
const XMLCh *const    attrPrefix,
const XMLCh *const    attrValue,
const XMLAttDef::AttTypes    type = XMLAttDef::CData,
DatatypeValidator *    datatypeValidator = 0,
const bool    isSchema = false
 

This method is called to set up a default constructed object after the fact, or to reuse a previously used object.

Parameters:
uriId  The id into the validator's URI pool of the URI that the prefix mapped to. Only used if namespaces are enabled/supported.
attrName  The base name of the attribute, i.e. the part after any prefix.
attrPrefix  The prefix, if any, of this attribute's name. If this is empty, then uriID is meaningless as well.
attrValue  The value string of the attribute, which should be fully normalized by XML rules according to the attribute type.
type  The type of the attribute. This will indicate the type of normalization done and constrains the value content. Make sure that the value set meets the constraints!
datatypeValidator  type used to validate the attribute, if it was validated by an XML Schema
isSchema  true if and only if this attribute was validated by an XML Schema

void XMLAttr::setDatatypeValidator DatatypeValidator *    datatypeValidator
 

This method will update the datatype validator that was used to assess the validity of the value of this attribute.

Parameters:
datatypeValidator  DatatypeValidator used to assess the validity of this attribute's value
Deprecated:

void XMLAttr::setName const unsigned int    uriId,
const XMLCh *const    attrName,
const XMLCh *const    attrPrefix
 

This method will update just the name related fields of the attribute object.

The other fields are left as is.

Parameters:
uriId  The id into the validator's URI pool of the URI that the prefix mapped to. Only used if namespaces are enabled/supported.
attrName  The base name of the attribute, i.e. the part after any prefix.
attrPrefix  The prefix, if any, of this attribute's name. If this is empty, then uriID is meaningless as well.

void XMLAttr::setSchemaValidated const bool    isSchema
 

This method will define whether the attribute was validated by an XML Schema.

Parameters:
isSchema  true indicates that this attribute was validated by an XML Schema; false indicates otherwise
Deprecated:

void XMLAttr::setSpecified const bool    newValue
 

This method will update the specified state of the object.

Parameters:
newValue  Indicates whether the attribute was explicitly specified or not. If not, then it was faulted in from a FIXED or DEFAULT value.

void XMLAttr::setType const XMLAttDef::AttTypes    newType
 

This method will update the attribute type of the object.

Parameters:
newType  The type of the attribute. This will indicate the type of normalization done and constrains the value content. Make sure that the value set meets the constraints!

void XMLAttr::setURIId const unsigned int    uriId
 

This method will set the URI id field of this attribute.

This is generally only ever called internally by the parser itself during the parsing process.

Parameters:
uriId  The uriId of the attribute.

void XMLAttr::setValue const XMLCh *const    newValue
 

This method will update the value field of the attribute.

Parameters:
newValue  The value string of the attribute, which should be fully normalized by XML rules according to the attribute type.


The documentation for this class was generated from the following file:


Copyright © 1994-2004 The Apache Software Foundation. All Rights Reserved.